Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
befsx41 - Remote Management
- Thread starter njac
- Start date
Not 100% sure for this model, but I would expect it to be the same as the BEFSR41 -
From inside the network, enter the router administration at Go to the status page and note your WAN IP address. Then go to the advanced Filters page and enable remote management and set the port to 8080 (if applicable) and apply. Now go back to the setup password page and set a very good password. Now you can administer the router from the internet with any web brower. Just enter
From inside the network, enter the router administration at Go to the status page and note your WAN IP address. Then go to the advanced Filters page and enable remote management and set the port to 8080 (if applicable) and apply. Now go back to the setup password page and set a very good password. Now you can administer the router from the internet with any web brower. Just enter
- Status
Similar threads
- Locked
- Question