Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCMSN Simulation 1
- Thread starter mikeleahy
- Start date
-
1
- #2
I cant tell you if that question will specificaly apear on your exam, but yes this is things you should know, and to route between vlans simply issue the command ip routing!!
Visit for free Cisco rack access.
CCNA, CCDA, CCNP, CCDP, CCIE R&S (Written), Net+, MCP, NCTS
Visit for free Cisco rack access.
CCNA, CCDA, CCNP, CCDP, CCIE R&S (Written), Net+, MCP, NCTS
You should always check Cisco's website for the latest information when you are preparing for any exam. If you haven't been there already, I strongly encourage you to so that you can check out what you need to know.
Inter-VLAN routing is a major section in the BCMSN exam. Remember this exam is about multilayer switching, not just layer two switching. From Cisco's website:
"Implement Inter-VLAN routing.
Explain and configure Inter-VLAN routing (i.e., SVI and routed ports).
Explain and enable CEF operation.
Verify or troubleshoot InterVLAN routing configurations."
Inter-VLAN routing is a major section in the BCMSN exam. Remember this exam is about multilayer switching, not just layer two switching. From Cisco's website:
"Implement Inter-VLAN routing.
Explain and configure Inter-VLAN routing (i.e., SVI and routed ports).
Explain and enable CEF operation.
Verify or troubleshoot InterVLAN routing configurations."
- Status
Similar threads
