BCM50's not booting up Solid Red Solid Green 1

[curlycord]

BCM50 R6
2 of them

When booting I end up with solid red status and solid green power......as if it was a running system with an alarm.
Only the LAN port LED that I am plugged into will be lit up (fluctuating normally)
Cannot Putty or use EM or obtain an IP.
Tried 3 other hard drives
Tried a Level 2 reset
Power Supply works fine on other BCM's

Has anyone had this issue and report it to Norvaya and get an answer?

Thanks




________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[ucxguy]

Solid red means a critical alarm. Even if you cannot access the system even via the OA&M port, you can still find out what the alarm is. Put the hard drive from the failing BCM50 into a Linux system, mount the partition with log files (the name will be something like /dev/sdb8 - the 8th partition on the drive) and look at the contents of the file alarms.systemlog.

 

[curlycord]

Thanks dude

________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[exsmogger]

Try a multi-image drive and see what choices it gives you if you are able to PuTTY into the system.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952