BCM50e Serving DHCP addresses upon reboot

[Kargo]

There is a service in the BCM50 that upon startup enables DHCP and begins dolling out IP Addresses to the network. We can disable this service after the fact but I was wondering if there was a way to disable it permanently so no IP's are served at all.

Thank you for the help.

 

[Deweyhumbolt]

You can disable DHCP through telset programming. Ftr*8.

 

[Kargo]

And this will disable the service upon reboot?

 

[acewarlock]

Under services menu Disable it.


This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[Khosher]

If it's a BCM50e/a you should be disabling the DHCP server from within the router settings and that will not re-enable itself after a reboot