BCM50e 1.00.2.04.j

[vztech]

I put this BCM on a network but when I do the rest of the company cannot us the internet. I have a static IP set and disabled DCHP Server on the BCM. I have never run into this issue before with other BCM50's network guys are no help
any ideas?

It's only dialtone-VZ

 

[Crowtalks]

Try a trace route from a PC to google or somewhere and see where the trace dies. Ping in and out of the network and see where you can get.

Connect a PC directly to the Lan1 port and try to release and renew to verify there is no DHCP on the 50.

 

[JustAGlitch]

There are 2 places to disable DHCP, you can disable DHCP in IP subsystems and also in the router configuration. You said it is a 50e so check the latter of the 2. If you are still getting DHCP from the router then you will have a problem once connected to a network.