BCM50 Sip Calls

[ManosArriba]

Hi,

I have a BCM 50 3.0 with a single SIP license.

When I try and make outgoing calls, I am returned with "no route to destination".
My SIP trunk is using the Pool:BlocA.
The DN of my ip phone has access to that pool.

Routing :
Route 001 - External Number = 9, Use Pool = BlocA, DN Type=Public (Unknown)

Dest Code = 6, Normail Route= 001, Absorb = All

I just can't seem to get the SIP trunk to dial out via the ISDN lines. Is it possible to do this?

Regards,


Matt

 

[morenot]

according to the above:
you dial 6xxxxxxxxx
so, the digits presented to sip trunk will be: 69xxxxxxxxx
absorb= all
external number=9

is correct this?