Hey guys I need your help. We've been trying to network a BCM50 and a Norstar MICS. Calls go through between the two switches. Our problem is that when we dial to the MICS we have to wait for 6-7 seconds before we get a dial tone and then we dial the extension number. What we wanted to do is to just dial XXXX (ext number) then ring the ext at the MICS. We don't want to wait for 6 secs for a dial tone then dial the extension. Please anyone help us with programming.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM50 Routing with VOIP Trks
- Thread starter djjack
- Start date
I'll assume you're using the MICS VOIP gateway.
My first guess would be that your route on the BCM 50 that's pointing to the MICS/IP trunks is configured as public, not private, and you're hitting the dialing timeout. Check the route and let us know.
My first guess would be that your route on the BCM 50 that's pointing to the MICS/IP trunks is configured as public, not private, and you're hitting the dialing timeout. Check the route and let us know.
- Thread starter
- #3
- Status
Similar threads
- Question
- Question
