BCM50 remote access thru internet question

[tech1999]

Hello,
I want to use Element Manager, installed on my office PC, to use the IP address of the router at my customers site to accesss the customers BCM50. (I can forward any ports needed for access to a local static NAT address that the BCM50 is on.) What ports need to be forwarded to the BCM50?

Thanks
tech1999

 

[NTL555]

Here's a few port 5989 TCP for element manager, 80 for http, and 443 for https. There's a whole page on firewall ports/resources in the network config guide for the BCM.

NTL555