Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM50 R3 Can't log into Callpilot or backup system

Status
Not open for further replies.
Apr 4, 2007
47
US
Also can't back up the system because callpilot is acting up.
Call pilot will start working again after about 9 minutes, but still can't log into it. I get an error message about the network. If you try to back up the system it will stop in the middle because callpilot cannot be started. this is a V3 that was upgraded from 2.0. I haven't upgraded the factory image, only the software. All current 3.0 patches have been applied. Only T7316e phones on the system. Any ideas?
 
Also go to the ip of the bcm50 and download a fresh version of element manager. Not saying this will fix call pilot, but may get you in the system where you ca n see alarms.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top