BCM50 R3,0 Bug - Alarm Time - Feature 875

[robl3000]

I think I have found a bug in the BCM50 3.0 system.

I have a need to use the Hospitality Alarm Time (Wake Up Call) feature. I have found that Element Manager will not allow me to add that in the button programming for my 1230/1220 IP Phones. The feature is missing from the drop down list on the button programming tabs on the DN records.

Next, I used Feature *3 to assign it to a key on the phone, which works well. However, upon adding a fey with F875, Element Manager no longer will pull all the data for the phone's DN record. It will stop about half way on the Button Programming Table tab -- Button Programming & User Speed Dial never gets populated and stay greyed out.

Removing F875 and Element Manager works properly and allows me to access all of the DN record details.

Can someone else verify if this is a bug on another BCM50 3.0?

Thanks!

==================================
<INSERT SIGNATURE HERE>

 

[norstarboy125]

are you using this feature for what it is suppossed to be used for (hospitality) of are you just trying to wake up sleepy end users lol? I can't honestly tell you if this is a 3.0 bug or not like I said the only time that I used any of the hospitality features it was for a hotel install not to just add alarm features to multiple sets...