I have a BCM50 with two IP remote sets. I have checked bothe set and both work. I have one in the same town as the BCM and it works OK. The second set in in a differant town and on a DSL line and I can only get it to work if I open the router completly up. If I open ports 51000 to 51200. The one in the town where the BCM is is on a Verizon network and the on that don't work is on a Embarq DSL. Does anyone have a answer for this?????
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM50 one IP phone works and the other don't
- Thread starter FLA1
- Start date
Any number of reasons: ISP blocking comes to mind.
Be more specific: How is the BCM connected to the internet? Directly on a Public? In a DMZ? How do the IP phones reach the BCM? VPN? A description of the network topology would GREATLY assist us in assisting you.
Here is your question restated:
I have a problem with IP phones. What is the answer?
Be more specific: How is the BCM connected to the internet? Directly on a Public? In a DMZ? How do the IP phones reach the BCM? VPN? A description of the network topology would GREATLY assist us in assisting you.
Here is your question restated:
I have a problem with IP phones. What is the answer?
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question