BCM50 OLI, PRI

[miditsupport]

I need to present a full 11 digit STD DDI number as the main outgoing ident for all og calls on my PRI equipped BCM50. I tried changing the public network received number length to 10 and then entering the number (minus the leading 0) as the OLI but this didn't seem to work. I noticed that changing it to the required length of 11 still only allows for 10 digits. Ideas anyone?

 

[miditsupport]

Oops, sorry, wrong thread. Moved to the BCM thread!

 

[KyBoy]

Why do you want 11 digits

 

[miditsupport]

So as to present the full STD number, i.e. 01234 567890

 

[curlycord]

Dialing Plan/Public Network/Public Network DN Length
Change the DEFAULT from 10 to 11, this value should be same or higher than the OLI length required.


=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca