Networking a BCM50 with a M1. Got everything working except one thing. When dialing from BCM and press 9, I want to be able to access CO trunk from M1. Currently I have to press 9 9. I have it as a destination code but is it possible to have the BCM insert another 9. Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM50 networking questions
- Thread starter texan01
- Start date
- Thread starter
- #2
You can insert a 9 in the route. Put 9 as an external number. Or better yet, don't strip any digits at all and send 9+ to the M1.
Never tried doing telset admin of VM on a BCM 50 yet. Saw the instructions in the docs, but always preferred the browser.
Never tried doing telset admin of VM on a BCM 50 yet. Saw the instructions in the docs, but always preferred the browser.
you can find under "Destination Code" -> "absorbed lenght". Take the "zero" from the Pull Down Menu.
other question: after press the "9" you can not hear a Dialtone! In Germany we need a Dialtone, because the user think he can not dial without a dialtone....
Any Idea how can i make a dialtone after press a Destination Code - in BCM or Succ4.5
other question: after press the "9" you can not hear a Dialtone! In Germany we need a Dialtone, because the user think he can not dial without a dialtone....
Any Idea how can i make a dialtone after press a Destination Code - in BCM or Succ4.5
- Status
Similar threads
- Question
- Question