BCM50 level 2 reset 1

[vztech]

anyone try to reset a BCM50 with the little pinhole next to the music input?
I have tried to reset 2 different BCM50's (same hardrive) with this method and it didn't do a thing.

Just curious if this method has worked for anyone else.

password has changed and I cannot log into EM so I wanted to blow away the system to default.

Trying to avoid calling nortel.


It's only dialtone-VZ

 

[hawks]

Yes it does work but you need to follow a sequence with the lights as you press the button. I forget what it was but I think you can find it from the docs on one of the BCM's you log into.

 

[hawks]

Also make sure you have any codes that are loaded on the system because you will have to put them back in.

 

[snowman50]

Perform a Level 1 reset.
power up the bcm
wait 5 seconds for the orange power led to flash.
press reset button once for level 1 reset.
wait 5 seconds for the 2 leds to go red and when the power led flashes press the reset button again.

the system will go into level 1 reset and the 2 red leds will flash quickly.

Perform a Level 2 reset.
power up the bcm
wait 5 seconds for the orange power led to flash.
press reset button Twice for level 2 reset.
wait 5 seconds for the 2 leds to go red and when the power led flashes press the reset button again.

the system will go into level 2 reset and the 2 red leds will flash quickly.

you now have to wait until the system is restored to factory settings.

reapply country profile and keycodes

 

[vztech]

Thank you

reset completed!


It's only dialtone-VZ