BCM50 iternal call between some time only

[SabooTB]

Hello,

I'm new at this system.
I set up most things but I have big problem with one thing.

I have one phone set which I want to set up as a internal phone between 8AM and 7PM so noone can call from this phone and it will not ringing between those hours.
Between 7:01PM and 7:59AM it have to work normally (it will ring normally and You cann call from this set).

Any ideas?

 

[ironhorse17]

Set night ring for that phone, it could also be the control phone.

Then set up a cos with password to dial out.

 

[SabooTB]

I dont need passowrd - between those hours it can be use normally.
How to set up night ring?
Where is it?

 

[allworxguy]

You have set a dialing filter that activates during the normal mode only, but be aware you you can't stop the phone from being called.

For advice on how to do this go to the BCM forum.

Marv

http://www.telemarv.ca

 

[ironhorse17]

You have to add from nothing to something, meaning default no outgoing calls and with a password allow calls.