BCM50 H323 Trunk

[Aerodesliza]

Im trying to interconnect using H323 Trunk two BCM50, I already make this:

Site A
======

Dialing Plan Routing
--------------------
Destination Codes
80
Normal route: 01
Absorbed Lenght: All

Routes
01
Use Pool: BLOCA
DN Type: Public

Routing Table
-------------
Name: Site1
Destination Digit: 233
IP: 'Ip Site2'
GW Type: BCM35
GW Protocolo: CSE
VoIP protocol: H323

H323 Setting
------------
Gateway: CSE



Site B
======

Dialing Plan Routing
--------------------
Destination Codes
80
Normal route: 01
Absorbed Lenght: All

Routes
01
Use Pool: BLOCA
DN Type: Public

Routing Table
-------------
Name: Site2
Destination Digit: 690
IP: 'Ip Site1'
GW Type: BCM35
GW Protocolo: CSE
VoIP protocol: H323

H323 Setting
------------
Gateway: CSE


Am I missing something? I tried to watch de call using the Monitor but I couldn't, I always received a busytone.

 

[Deweyhumbolt]

DN Type: should be Private.

Is BlocA your VoIP trunks?

"Adversity is Opportunity

 

[Aerodesliza]

Yes

 

[Aerodesliza]

I did this change, using Site A phone#: 2246 and Site B phone#: 2280

Site A
======

Dialing Plan Routing
--------------------
Destination Codes
7
Normal route: 01
Absorbed Lenght: All

Routes
01
Use Pool: BLOCA
DN Type: Private

Routing Table
-------------
Name: Site1
Destination Digit: 2
IP: 'Ip Site2'
GW Type: BCM35
GW Protocolo: CSE
VoIP protocol: H323

H323 Setting
------------
Gateway: CSE

Target Line
- Line 149 -Controlset: 2280 -Line Type: Public
- Primeset:2221 -Private received#:2280



Site B
======

Dialing Plan Routing
--------------------
Destination Codes
7
Normal route: 01
Absorbed Lenght: All

Routes
01
Use Pool: BLOCA
DN Type: Private

Routing Table
-------------
Name: Site2
Destination Digit: 2
IP: 'Ip Site1'
GW Type: BCM35
GW Protocolo: CSE
VoIP protocol: H323

H323 Setting
------------
Gateway: CSE

Target Line
- Line 149 -Controlset: 2246 -Line Type: Public
- Primeset:2221 -Private received#:2246

How, what I am missing?

 

[cook1082]

Try absorb 1 witch is the 7 then it will pass the 4 digits and make the gateway 3.6

 

[Aerodesliza]

When I try to select the Absorb option Im can only select ALL and 0, why that?
Gatway 3.6? GW Type?

 

[gberger]

Do you have MCDN keycode in both system? The "Private Received" field works only if the MCDN keycode is applied otherwise the bcm will look only at the "public received" field.Make Gateway type 3.6 like cook said and select "CDP" for the dialing plan.

 

[Aerodesliza]

I have the MCDN keycode installed and the Private received tab is enable but I can't select GW type: 3.6 Im can only see this option: BCM, BCM35, IPT, other, otherwise I can't select absorb 1 because Im using only one digit for destination code '7,' this digit is absorb for default, if I use two digit ex.'71' I can select aborsb 1.

 

[Aerodesliza]

Thanks everyone now is working

 

[gberger]

What was the resolution?