robweston4563
Technical User
Hi
I have a new BCM50, I needed to add to it, 4 lines, we were advised to buy a GATM4, which we did and have installed that and it is linked to the bcm. We have wired our 4 lines to this module, but, we have no lines.
When I look at telephony resources on the element manager it says:
Expansion 1 &2 are empty. Do I need a key-code for the Gatm4? I was led to believe I could just hook it up.
When I look at the lines in All Lines, I have a number of VOIP lines, 4 BRI-ST2 lines and a number of Target lines. I have read that the GATM4 module uses line 065 as default, but I cannot find it or add it. Everything else is working, I just need to get the lines on the system..... any ideas?
The System is BCM50B Version 6.0.2.05.237
Thanks
Rob
I have a new BCM50, I needed to add to it, 4 lines, we were advised to buy a GATM4, which we did and have installed that and it is linked to the bcm. We have wired our 4 lines to this module, but, we have no lines.
When I look at telephony resources on the element manager it says:
Expansion 1 &2 are empty. Do I need a key-code for the Gatm4? I was led to believe I could just hook it up.
When I look at the lines in All Lines, I have a number of VOIP lines, 4 BRI-ST2 lines and a number of Target lines. I have read that the GATM4 module uses line 065 as default, but I cannot find it or add it. Everything else is working, I just need to get the lines on the system..... any ideas?
The System is BCM50B Version 6.0.2.05.237
Thanks
Rob