BCM50 / Expansion Unit Fan replacement

[Bocsta]

As a quick fix to noisy fans (before I relocate the physical units), I have bought 2 Delta Fans for an expansion unit per this thread

http://www.tek-tips.com/viewthread.cfm?qid=1713362

(thanks in advance to NorstarExpert)

I am a newbie to BCM50/telephony in general but am tech minded and have built my own pcs etc

Question is can I simply turn off the expansion unit, disconnect all connections, replace the fans, reconnect all connections, power up and we are good to go ? No reprogramming/re-interfacing required ?

I have the BCM50 manual and have read up on fan replacement so know what is involved.

Any help would be appreciated

 

[Firebird Scrambler]

Yep!. That sounds fairly good to me.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.