BCM50 expansion power supply

[Jon Hirschman]

Hi,

I have an digital trunk expansion unit that I want to connect to my system. Unfortunately it didn't come with a power supply. I have read that a laptop power supply will work if it has has the following specification:

INPUT: AC100-240V 2A 50-60 Hz
OUTPUT: DC 19V/6.32A

I have found a power supply that fits with the following power ratings.

INPUT: 1000-240V, 47-63Hz; 1.5A
OUTPUT: 20V; 2.5A

I did plug it in for a minute to see if the lights went on on the expansion unit turned on, which they did.

So I am wondering if I can use the power supply for the expansion unit without causing any issues.

Any help would be appreciated.

Thanks,
Jon

 

[curlycord]

I personally do not recommend to use a part that was not meant for X so if you want to go cheap and not buy the proper part then your own your own.....specially when you specs above do not match.

________________________________________

Add me to LinkedIN

=----(((((((((()----=

http://www.curlycord.com

Toronto, CAN

 

[exsmogger]

It's slightly over voltage and it's underpowered at only 2.5 amps. I wouldn't recommend using it. Do a search on eBay for FSP120-AAB. Lots of the right power supply for sale.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952

 

[Jon Hirschman]

Thanks, I ordered the power supply listed above. 13 dollars delivered is not so bad.

 

[curlycord]

Wanna be my Purchasing Agent?




________________________________________

Add me to LinkedIN

=----(((((((((()----=

http://www.curlycord.com

Toronto, CAN