Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM50 - Changing default LAN IP address 4

Status
Not open for further replies.

Sparkie37

Programmer
Sep 26, 2007
62
CA
I have a BCM50 and I am attempting to change the LAN default IP address to the one that the customer gave me. It will not take.

I entered the new IP address plus the IP gateway.
The gateway changed BUT the LAN IP did not

DO I needto reset the BCM when I do this?
 
Usually, you just lose the connection and have to log in again. Have you got full access rights onto the BCM?. Have you tried changing the IP address from a Telset?. A reboot will be required!.


All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
I had the same issue yesterday, I kept changing the IP address via Element Manager, but it never took the change. Just kept kicking me out.
I went to the teleset programming and made the change to the IP address, then it asked for a reboot. Confirm and after reboot, the IP address was installed in the system.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top