BCM50 Analogue Handsets/Trunks

[MarkHillman]

Hi Guys,

I have a customer with a BCM50 release 5.0. They have CLID on the incoming trunks which shows on the T7316 but it will not show on the two DECT handsets. They are using the ports on the system and not ATA's.

Is there something im missing to pass this through?

Thanks

Mark

http://www.thebcmspecialist.co.uk

 

[oldestgeek]

In BEM, in the panel where the lines are assigned to ring on the sets, insure that the "caller ID set" box is ticked on the DECT sets.