Looking for ideas on missing link when setting up BCM50 with i2004 at remote locations, what ports need to forwarded on the firewall and the router. I have 7000, 50000-52850, & 28000-28255 set at the the host location to fwd to the BCM. On my phones I get a steady time/date but no firm connection. Do I have to many ports open? By the way, Bcm monitor says I have IP phones connected, proper IP address show, and they are showing ports ph1 1024, ph2 5000.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM50 & i2004 Settings for firewall/router
- Thread starter TLoinDC
- Start date
Use a separate VPN connection between the remote sites and the central site. IP telephony will be neither stable nor acceptable over the public internet without the VPN.
Search the forum and you will see this message re-iterated countless times.
Search the forum and you will see this message re-iterated countless times.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question