FastBusy4657
Programmer
Can anyone tell me how to change the default modem DN (333) to another DN? All our other BCM's have 395 as a dial-in DN and I want to have them all the same.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM50 3.0 Change Moden DN
- Thread starter FastBusy4657
- Start date
- Status
In Element Mgr on Configuration Tab.
Click Telephony, Dialing Plan, DNs
Scroll down to the bottom of the DN list and take note of the last DN listed.
Now, Telephony, Dialing Plan, General, Click Change DN.
First change DN395 to next available DN from bottom of DN list seen earlier.
After DN395 is free, then change 333 to 395.
After that, click on Administration Tab, General, Service Manager, find service called modemcc, highlight it and click restart.
Done!
Click Telephony, Dialing Plan, DNs
Scroll down to the bottom of the DN list and take note of the last DN listed.
Now, Telephony, Dialing Plan, General, Click Change DN.
First change DN395 to next available DN from bottom of DN list seen earlier.
After DN395 is free, then change 333 to 395.
After that, click on Administration Tab, General, Service Manager, find service called modemcc, highlight it and click restart.
Done!
- Status
Similar threads
- Locked
- Question
- Locked
- Question