BCM450R6 with 2 default gateways

[koulioumbis]

Hello team
I need to connect a bcm450r6 to 2 different networks with 2 different IP add and 2 different gateways.
One of these 2 networks will have ip phones connected on it.
Is this possible? BCM450 does not do routing so what is the possible scenario?

Thank you

Nikos

 

[kyle555]

You should be able to add a static route, no? have 1 interface 1.1.1.1 gateway 1.1.1.254, a second interface 2.2.2.2, gateway 2.2.2.254 and then static route 0.0.0.0 via interface 1 for say the broader network/WAN/other offices but have subnet 192.168.1.0/24 route through lan2 because you have a dlink router with WAN IP 2.2.2.254 and 4 ports on 192.168.1.x behind it.