Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

bcm450 R6 intergration with Nurse Call system via Mediatrix 3301-001

Status
Not open for further replies.

dibthree

Technical User
May 3, 2006
398
US
I am working with a Nurse Call vendor trying to get the BCM to talk to the nurse call system.

BCM450 connects via T1/PRI NI2 to a Mediatrix 3301-001.

The Mediatrix is then connected to a GE Telegence nurse call system via SIP.

When I run BCM monitor I see the digits go across to there system on the PRI.

The call immediately drops.

We also ran Wire Shark and can see the SIP call information being passed to the nurse call system from the mediatrix.

Any ideas would be greatly appreciated.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top