Wendelspanswick
Programmer
Any one had any success using an AC15 on a BCM400 to connect to a Modular.
The old setup was 2 modular systems in separate buildings with an AC15 circuit connecting the two.
We have replaced one of the modulars with a BCM400, the problem is that the BCM does not see the AC15 adapter, it sees it as an unequipped port.
John
Have you tried turning it off then on again!
The old setup was 2 modular systems in separate buildings with an AC15 circuit connecting the two.
We have replaced one of the modulars with a BCM400, the problem is that the BCM does not see the AC15 adapter, it sees it as an unequipped port.
John
Have you tried turning it off then on again!