Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM400 to Modular using an AC15 Adapter, can it be done?

Status
Not open for further replies.

Wendelspanswick

Programmer
Jul 1, 2010
35
GB
Any one had any success using an AC15 on a BCM400 to connect to a Modular.
The old setup was 2 modular systems in separate buildings with an AC15 circuit connecting the two.
We have replaced one of the modulars with a BCM400, the problem is that the BCM does not see the AC15 adapter, it sees it as an unequipped port.
John

Have you tried turning it off then on again!
 
AC15 wasn't designed for use on BCM systems. You would have to replace all of your modular systems with BCM's and go for a digital or IP protocal.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top