I just started looking after a BCM400 and don't have much experience on this platform. Anyhow, I have a bank of two T1's with AT&T and for whatever reason after so many days some of the lines/ports stop taking calls, it's totally random, if I reset the spans all channels work afterwards but after a day or two some of the ports stop taking calls, I've done a couple resets of the spans and it's never the same ports that go into inactive mode, it's totally random.
When I test it hunts from Line 114 up to line 91 the from Line 84 to 61. At the moment lines 109,108,101 and 95 are "down"
I check the alarm log, clean as a whistle. I already had AT&T test the circuits on several occasions and they say they are fine..
When I test it hunts from Line 114 up to line 91 the from Line 84 to 61. At the moment lines 109,108,101 and 95 are "down"
I check the alarm log, clean as a whistle. I already had AT&T test the circuits on several occasions and they say they are fine..
