Bcm400 swape extension by function 1

[JM2009]

Dear expect,

Is there any method that I can swape between two extensions by function/ feature key from the bcm phones. If yes, how to do it?

Thanks!

 

[curlycord]

No...needs to be done via config programming via telephone or software.

 

[JM2009]

Hin Curlycord,

Thanks for your info. Btw how to config programming via telephone?

 

[curlycord]

You will need to read the config guide for your given model and release.
It will tell you how to log in, how to navigate the programming and where everything is located.

If the BCM is on the network then the guides are available via the browser.

Keywords are:

Set Relocation
This is turned off by default
Put the sets back they way there were, turn Set Relocation to "Y" for Yes
Then move the sets around as you want and the ext/DN will go with the phone.

Change DN
-This is another option but it does not change the programming of the phone, only the DN.