BCM400 Remote management w\o static IP

[geofan13]

So here is the scenario. Customer has a BCM400 and needs to allow remote management of the BCM through IP outside of the network. They only have 1 static IP from their ISP. They have a Sonicwall firewall with NAT enabled and would like to do port forwarding on the remote management requests to the private IP address they are going to give the BCM400 on their network.

Is this doable? and what info is required to set this up?

 

[curlycord]

Way too many ports for a BCM.

Secure:
Have the customer install Sonic Global VPN Server software if not on the router already.
Then you will need to install SonicWall VPN Global Client

Once connected you then need desktop access to a PC or Server of sorts then you can browse to the BCM


None secure:
Customer to setup Remote Desktop access to a PC or alike using an external IP, port for Desktop needs to be forwarded.

We have a BCM forum if you want to take it further but realy you need a network forum:

http://www.tek-tips.com/threadminder.cfm?pid=1361