crankyralph
Technical User
BCM400 4.0
System starts up properly, and all is well for 10-15 minutes ( element manager / callpilot manager, with mailboxes and auto-attendant ), then the voicemail goes down and you get the " your session cannot continue ". You cannot log on with element mgr, or BCM Monitor; gives you a username / password authentication error - but if you are already logged on, you can use element mgr for another 10-15 minutes before it boots you out with a session timeout error. Telephony stays fully functional. If you try CallPilot mgr, you get the system startup / initialization screen!
I was able to run a backup, and pull the logs; after multiple tries - between reboot and lockup.
Tried a new Bbase Function Tray, and a new power supply with no success. MSC card? Hard disk failure / corruption? Why would the failure timing be so consistant?
Aaaarrgghhh! Any thoughts?
System starts up properly, and all is well for 10-15 minutes ( element manager / callpilot manager, with mailboxes and auto-attendant ), then the voicemail goes down and you get the " your session cannot continue ". You cannot log on with element mgr, or BCM Monitor; gives you a username / password authentication error - but if you are already logged on, you can use element mgr for another 10-15 minutes before it boots you out with a session timeout error. Telephony stays fully functional. If you try CallPilot mgr, you get the system startup / initialization screen!
I was able to run a backup, and pull the logs; after multiple tries - between reboot and lockup.
Tried a new Bbase Function Tray, and a new power supply with no success. MSC card? Hard disk failure / corruption? Why would the failure timing be so consistant?
Aaaarrgghhh! Any thoughts?
