BCM400 default IP address

[Bradstephenson]

I have 5 BCM400s that I need to default out. I have a couple of questions.

1. The default address for LAN2 I understand to be 10.10.11.1. What is the subnet and default gateway settings?

2. Where do I download the Business Element Manager?

I believe the BCMs are running version 4.0.xx

 

[curlycord]

Subnet 255.255.255.252


Gateway is what ever your router is, if its not on the network leave it blank.


________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[Firebird Scrambler]

A useful link to download the EM tool is available at

http://bcm.sipsw.com/ApplicationLauncher/

As for the BCM 400 systems, The default LAN's were usually

LAN1 = 10.10.10.1 Subnet = 255.255.255.0
LAN1 = 10.10.11.1 Subnet = 255.255.255.0

The BCM 50 systems tended to use the OAM subnet of 255.255.255.252.

You might want to try and use a serial port cable to see if you can obtain the IP addresses assuming that the LAN2 port was changed.



Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[koulioumbis]

Also if you go to 10.10.11.1 or 10.10.10.1 (lan2 or lan1) you will be able to download EM locally from the BCM hard disk.

Nikos