I'm trying to set up a WAN connection between a BCM400 with a WAN card and a Contivity 1100. The Contivity logs are showing CRC errors but the BCM shows nothing. The set up is b8zs; esf; lcp echo at 10 and it is ppp not frame relay. I've used a T-Berd analyzer to check the lines and it shows all is well with the BCM and the Contivity. I don't have the right connector to do an inline test. Has anyone had any troubles with the BCM WAN cards and a Contivity?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM400 & Contivity 1100
- Thread starter nbowles
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question