For some reason, i can no longer do backups. I have done them in the past without issue, but its been a little while sense my last backup and i figured i would do one before making some changes. The backup routine runs, i can watch system utilization jump, watch what services it is its turning off and back on, but the file is no place to be found. About 6 months ago had a rep come out and install about 4 major patches alone with some other work he was doing, i am wondering if those patches might have something to do with it. My last attempt i had it store it to itself and that one is listed if i go into restore.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM400 Backup
- Thread starter plopsdad
- Start date
Firebird Scrambler
Systems Engineer
What version of BCM do you have as the backup methods differ for the 2.x / 3.x and 4.x versions.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
Firebird Scrambler
Systems Engineer
I did a guide some time ago that I usually refer when ever I have to backup the older BCM's as I always get in a muddle.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question