Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM400 and SIP Trunk

Status
Not open for further replies.
EngMajdi82

EngMajdi82

Vendor
May 9, 2015
110
JO
Hello ...

I have a BCM400, and a customer need a recording system, the 3rd party company want to integrate to BCM400 via SIP trunk.
I know that the SIP license on BCM400 is included in VOIP GW as I remeber, my question is it possible to integrate the SIP trunk on BCM400 with 3rd party ?

Thanks
 
Sort by date Sort by votes
From what I recall, SIP trunking on the early BCM 400 at V4.0 and also the BCM 50 systems at release 1.0 to 3.0 had basic programming which is very different to what was changed at release 5.0 and 6.0.

It's difficult to answer your question as this depends on how the 3rd party SIP is provided.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

MoJHK
  • Locked
  • Question
Emetrotel SIP trunk to IPO500V2
Replies
1
Views
122
curlycord
curlycord
AShammah
  • Question
BCM50/FreePBX integration Sip or H.323
Replies
4
Views
132
AShammah
AShammah
AShammah
  • Locked
  • Question
BCM50 Voip.ms sip trunk & call route setup 1
Replies
10
Views
203
AShammah
AShammah
cndr99
  • Locked
  • Question
BCM400 => Asterisk: no ringing near end ex BCM 2
Replies
10
Views
188
curlycord
curlycord
2dfx
  • Locked
  • Question
SIP Trunks on Digital Sets? 4
Replies
18
Views
296
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top