BCM400 4 x 16 1

[parm2013]

BCM 400 with two 4 x 16s working fine

can you put another one or two 4 x 16s in?

Seems you can't have 2 different modules on the same bus. buses 0 and 1 are for IPs. Buses 2, 4, and 6 can be used for Trunk Mods for the lines and buses 3,5 7 for Stn Mods. I am using 2/6

The modules we have are 4x16, we may need to go to 0x 32 for extra extensions

Can anybody recommend a plan?

 

[norstarboy125]

Personally I always start my stations on bus 2 and trunks on bus 6 as bus 1 and 7 are reserved for ip and voicemail. To my knowledge there is no bus 0.

Charm City Communications

http://www.charmcitycommunications.com

 

[parm2013]

Thx. 0 was maybe a bad habit from the network side.

 

[parm2013]

Used 0 x 16 instead everything is working fine