BCM200 PRI/T1 Card

[harrisjt]

does this system require a keycode for the T1/pri card so i can cross connect to my callmanager?

 

[exsmogger]

On the BCM there is no keycode required for a DTI module.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952

 

[harrisjt]

whats this i read on here that the 200 can be upped to a 400 with base tray change or something? will the bcm200 support verson 5.0 or 6

 

[curlycord]

http://downloads.avaya.com/css/P8/documents/100125906

=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[harrisjt2000]

so if i bought this to up my BCM to 6.0 i assume it becomes the avaya bcm, will it support the avaya phones too or just the nortel style ones, im just wondering

 

[hawks]

The Avaya phones will not work as far as I know. But instead of an upgrade if you want to go to RLS 6. I would just buy a new rls 6 BCM 450 and migrate the codes over from the 200.

 

[curlycord]

Just Nortel phones.

Only the Avavay IP Office system will handle both its own and Nortel phones if the proper hardware is installed.




=----(((((((((()----=
curlycord

http://www.curlycord.com