Hi,
I got a BCM1000, version 3.6.. the PC side is dead, but the MSC is ok.. I found the problem was due to corrupted file on the hard disk.
I then connected the BCM hard disk to my pc and run chkdsk -f on it. Well, it fixed the corrupted file and I could boot up the BCM. All looks Ok, I could browse to the BCM but I couldn't log in to the telephony side of it, although I could log in to Call Pilot.
I then did a restore from a back-up file, but it couldnot finish the Voice Application section. After 2 hrs sitting on it, I resorted to closing down the restore session.!!!
I then connect to Bcm via the serial, the password has reverted back to PlsChgMe! On the first BCM page, it indiated that there is a computer name mismatch.
Now... I am running out of idea on what to do next... Could anyone help??
Thanks..
a baffled tech...
I got a BCM1000, version 3.6.. the PC side is dead, but the MSC is ok.. I found the problem was due to corrupted file on the hard disk.
I then connected the BCM hard disk to my pc and run chkdsk -f on it. Well, it fixed the corrupted file and I could boot up the BCM. All looks Ok, I could browse to the BCM but I couldn't log in to the telephony side of it, although I could log in to Call Pilot.
I then did a restore from a back-up file, but it couldnot finish the Voice Application section. After 2 hrs sitting on it, I resorted to closing down the restore session.!!!
I then connect to Bcm via the serial, the password has reverted back to PlsChgMe! On the first BCM page, it indiated that there is a computer name mismatch.
Now... I am running out of idea on what to do next... Could anyone help??
Thanks..
a baffled tech...