Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM To IPOffice 1

Status
Not open for further replies.
Sort by date Sort by votes
yes. Multiple times. Follow the interop above and you are good to go.
 
Upvote 0 Downvote
do you think this would work with a BCm 400 R4.0? Can I get the SIP trunk licenses for that BCM?
 
Upvote 0 Downvote
You could have SIP trunks, but the programming was very different as the BCM 400 is very old. You might be better off using H323 instead.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
 
Upvote 0 Downvote
Forgive me for asking how is it different? It all seems similar.
 
Upvote 0 Downvote
If you have VOIP trunks, then your BCM will support both H323 and SIP. If you have just the SIP trunks, then only SIP can be used.

The SIP programming area on the BCM 400 had less features than on the later BCM 50/450 release 6.0 systems.




Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support


 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

LidLock Technologies
  • Question
BCM 200 R3 Disk Image 1
Replies
5
Views
858
curlycord
curlycord
bluemr2
  • Locked
  • Question
BCM 50 R6 Patches
Replies
3
Views
441
TLDuk
TLDuk
LidLock Technologies
  • Question
BCM 200 R3.6 Unified Manager Java
Replies
6
Views
295
LidLock Technologies
LidLock Technologies
jsaad
  • Locked
  • Question
BCM 50 cycling 1
Replies
12
Views
239
ucxguy
ucxguy
jsaad
  • Locked
  • Question
BCM 400 4.0 lights flashing
Replies
11
Views
250
exsmogger
exsmogger

Part and Inventory Search

Sponsor

Back
Top