BCM Switch Data - CDR

[njohnsen]

I have been working with CS-1000's in the past and they have RS232 ports that push all of the switch CDR data to a printer.

Is anyone aware of a way to do the same on a BCM?

 

[Firebird Scrambler]

It's done over the IP on the BCM's

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[oldestgeek]

You can use ACtivity Reporter to view recent CDR reports but they're pretty limited. You can purchace software that will allow you to creat custom reports and see all historical data. I personally like RSI ShadowCMS software.

 

[njohnsen]

I know I can find that info on the network, but I was hoping to push that data stream to an open RS232 port.

Are you aware of a way to push that data from the network to also transmit to an open RS232 as a data printer?

Thanks for all your help and suggestions!