BCM, SRG, faulty hard disc, new disc fited now need keycode re enabled

[dogandbone]

I have replaced a Hard disc on a BCM 50 SRG and now need to have the existing key code re enabled so i can retrive it and load it, how do i go about this??..Cheers

KEEP
ON
COMMUNICATING

 

[Khosher]

You need to be registered with Nortel to retrieve keycodes.

Are you registered ?

 

[dogandbone]

Hi Khosher,
As a company we are, one of my colleges will have an account.

KEEP
ON
COMMUNICATING

 

[Khosher]

Well you are in luck so. Just go to the KRS in nortel.com

Put in the system ID and you can download the keycode from there

 

[dogandbone]

Do we not need to have them regenerated, can we just down load them and use them second time.
Will give it a go.....Cheers Khosher

KEEP
ON
COMMUNICATING

 

[Khosher]

No need to regenerate. You can just download. You would only need to regenerate if the system ID was changed.

 

[dogandbone]

Cheers Khosher, I will give a go and report back....Thanks....DnB

KEEP
ON
COMMUNICATING

 

[leftbase2009]

What if we just maintain our system and not registered with Nortel?

 

[Dasheen]

Then u need to call your vendor and hope they have access to the nortel krs system to retrieve the keycode file.