Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM Software Upgrade

Status
Not open for further replies.

bliemsgirl

Programmer
Jan 24, 2005
426
SR
Is there anyway to upgrade the software version on a BCM?
 
Yes, you can go, for example, from 3.6 to 4.0.

SHK Certified (School of Hard Knocks)
 
Ok how would I do this? Do I need to login into the nortel site to get this done?
 
Don't get offended but you need to call a vendor for this. Things can happen on an upgrade that will require someone that has experience on the BCM.

SHK Certified (School of Hard Knocks)
 
You need to buy the upgrade kit, unless you know someone that you can get it free. The upgrades from 2.5 to 3.6 were free, but from 3.6 and 3.7 to 4.0 will cost $$$.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top