QueBall780
Technical User
Avaya has released SU 22 today for BCM release 6 systems.
Authorized users can be download it at
Looks like the only change noted from SU 21 is the fix to the BASH security vulnerability.
The included readme:
Software Update Name: BCM450.R600.SU.System-022.201412
Applicable H/W Platforms: BCM450
Applicable S/W Platforms: 10.0
Category: GEN
Installation Recommendations:
This update should be applied to all new installations of BCM450 Release 6.0.
Existing installations should have this update applied if they are
experiencing any of the issues that are corrected. There is no need to
schedule specific maintenance to apply this upgrade if there are no
reported issues. In those cases, systems should be updated at the next
regular service opportunity.
Note: In order for the FMFM to work, user has to "Enable" the VAD manually by
following the below steps.
Step1:
Using set based admin login with the following info
Feature **266344
User ID: 738662
Password: 266344
Step2:
Go to "System prgrming>AnlgTrks VAD" and Enable/Disable VAD
After enabling VAD if the customer is facing LNR issue the Noise Floor
value in VAD has to be adjusted manually. Normally Noise Floor value > 590
resolves the issue.
Components and Versions:
bash 2.05b.2
bcmEMcartridge BCM450R6.ab52
bsp-kernel 6.1.3.7
cdr 6.1.1.281
core-telephony 6.1.1.28.48
cte 6.1.4.177
cti 52.0.136
dhcp-provider 6.1.1.3
dialogger 46.1.1.136
dsp-firmware 56.10.60.9.9
element-manager 62.0.3.109
elsie_timezone_32.tgz elsie_timezone_32.4
feps 6.1.57.295
gap 6.0.7
initrd 1.89.196
iptel-mrs 6.1.36.298
iptel-sas 6.1.4.126
iptelprovideragent 6.1.42.265
lms 6.1.1.146
log-provider 6.1.1.278
mgs 6.1.36.298
mof-db 1.90.109
mps 6.1.36.298
mpsmi 6.1.10.182
recovery 6.1.1.181
remotex 6.1.1.28
remotex-init 6.1.1.2
samba 3.0.5.2
scd 6.1.7.214
snmp-provider 6.1.2.249
src 6.1.2.4.7
system-release 10.0.2.62.279
utps 6.1.58.299
voicemail 60.1.25.285
webpage 6.1.4.71
Constituent Updates:
===================
New updates for this SU:
------------------------
BCM450.R600.BASH-135*
* It has not been released as an 'atomic' patch
Updates from previous SU:
------------------------
BCM450.R600.UTPS-133
BCM450.R600.IPTEL-129
BCM450.R600.CORE-TELEPHONY-128
BCM450.R600.DHCP-PROVIDER-127
BCM450.R600.CORE-TELEPHONY-124
BCM450.R600.VOICEMAIL-123
BCM450.R600.UTPS-120
BCM450.R600.REMOTEX-INIT-119
BCM450.R600.CORE-TELEPHONY-118
BCM450.R600.BEM-115
BCM450.R600.DSP-FIRMWARE-114
BCM450.R600.CDR-113
BCM450.R600.SRC 110
BCM450.R600.CORE-TELEPHONY-112
BCM450.R600.SCD 109
BCM450.R600.IPTEL-108
BCM450.R600.BEM-99
BCM450.R600.IPTEL-105
BCM450.R600.REMOTEX-INIT-104
BCM450.R600.UTPS-102
BCM450.R600.SRC-98
BCM450.R600.CORE-TELEPHONY-96
BCM450.R600.UTPS-92
BCM450.R600.IPTEL-90
BCM450.R600.VOICEMAIL-88
BCM450.R600.VOICEMAIL-87
BCM450.R600.IPTEL-86
BCM450.R600.SNMP-PROVIDER-85
BCM450.R600.KERNEL-83
BCM450.R600.CORE-TELEPHONY-84
BCM450.R600.VOICEMAIL-81
BCM450.R600.SCD-80
BCM450.R600.IPTEL-77
BCM450.R600.CORE-TELEPHONY-76
BCM450.R600.CORE-TELEPHONY-74
BCM450.R600.VOICEMAIL-73
BCM450.R600.IPTEL-72
BCM450.R600.SAMBA-71
BCM450.R600.ELEMENT-MANAGER-69
BCM450.R600.INITRD-68
BCM450.R600.IPTEL-67
BCM450.R600.ELEMENT-MANAGER-66
BCM450.R600.IPTEL-63
BCM450.R600.BCM-to-IPO-Migration-61
BCM450.R600.CORE-TELEPHONY-64
BCM450.R600.VOICEMAIL-62
BCM450.R600.UTPS-59
BCM450.R600.KERNEL-56
BCM450.R600.KERNEL-45
BCM450.R600.TIMEZONE-50
BCM450.R600.IPTEL-46
BCM450.R600.UTPS-42
BCM450.R600.CTE-41
BCM450.R600.CORE-TELEPHONY-32
BCM450.R600.CORE-TELEPHONY-12
BCM450.R600.VOICEMAIL-36
BCM450.R600.IPTEL-37
BCM450.R600.IPTEL-19
BCM450.R600.ELEMENT-MANAGER-38
BCM450.R600.RECOVERY-39
BCM450.R600.DSP-FIRMWARE-28
BCM450.R600.SRC-MPS-26
BCM450.R600.UTPS-31
BCM450.R600.BEM-25
BCM450.R600.ELEMENT-MANAGER-24
BCM450.R600.VOICEMAIL-17
BCM450.R600.CTE-LMS-16
BCM450.R600.INITRD-15
BCM450.R600.ELEMENT-MANAGER-14
BCM450.R600.IPTEL-13
BCM450.R600.CORE-TELEPHONY-8
BCM450.R600.IPTEL-11
BCM450.R600.IPTEL-7
BCM450.R600.UTPS-9
BCM450.R600 SU-2
BCM450.R600.CORE-TELEPHONY-1
Dependencies: BCM Release 6.0 version R6.0 1.02
Product Dependencies: None
Size: 89.83 MB
System Impact:
Time to apply approximately 10 minutes
Does update application force reboot: Yes
Over last Cumulative Smart Update: Yes
Over default content: Yes
Other Impacts: All services will be unavailable during the update until the system reboot completes.
Limitations: None
Other Impacts: None
Update Removable: No
New updates description:
------------------------
BCM450.R600.BASH-135
---------------------
1. BCM NCGL Bash Bug Vulnerability
GNU Bash versions 1.14 through 4.3 contain a flaw that processes commands placed after function
definitions in the added environment variable, allowing remote attackers to execute arbitrary
code via a crafted environment which enables network-based exploitation.
After applying this fix, the bash bug vulnerability issue exist in the NCGL will be resolved.
wi01194143
Previous updates description:
-----------------------------
BCM450.R600.UTPS-133
---------------------
1. Inclusion of UNIStim 5.5.2 0621C8V,0623C8V,0624C8V and 0625C8V
for IP phones i2007, 1110, 1120e and 1140e respectively.
062AC8V for IP phones 1210, 1220 and 1230.
wi01175704
BCM450.R600.IPTEL-129
-----------------------
1. Incoming Analog trunk call to BCM transferred to Call Pilot on CS1K over SIP
trunks Fails due to wrong media attributes updation in offer update message.
This updates resolves this issue by handling the BCM's internal media streams state.
wi01160417
BCM450.R600.CORE-TELEPHONY-128
--------------------------------
1. Coretel crash occurs when there is a VOIP fallback call with outgoing dial
digit length exceeding 24digits. It causes all the IP sets to reboot and alarm
logs show: 52004 **ERROR** FUMP channel not ready; MPS service aborted.
This update resolves the issue.
wi01153137
BCM450.R600.DHCP-PROVIDER-127
------------------------------
1. The DHCPProviderAgent fails to restart. The issue occurs because of
a large DHCP lease record size which caused the service to crash.
This update resolves the issue
wi01135384
2. The DHCPProviderAgent fails to restart.The issue occurs because of
a DHCP lease record buffer corruption which caused the service to crash.
This update resolves the issue.
wi01135386
BCM450.R600.CORE-TELEPHONY-124
-------------------------------
1. BCM digital user is not able to hear the announcement from CISCO service
provider, when the PSTN subscriber is not available.
This update resolves this issue.
wi01133072
Software update BCM450.R600.VOICEMAIL-123
------------------------------------------
1. During Restore form Factory default through EM, Mailbox Cabinets are
not getting cleaned up properly and thereby impeding same mailbox
creation on first attempt.
This update resolve the issue.
wi01123924
Software update BCM450.R600.UTPS-120
--------------------------------------
1. Inclusion of UNIStim 5.5.1 0621C8T,0623C8T,0624C8T and 0625C8T
for IP phones i2007, 1110, 1120e and 1140e respectively.
062AC8T for IP phones 1210, 1220 and 1230.
wi01124861
Software update BCM450.R600.REMOTEX-INIT-119
---------------------------------------------
1. Unable to make FMFM calls configured on TDM set with KIM module attached.
FMFM does not work after TDM set with KIM is unplugged and plugged back in.
wi01120599
Software update BCM450.R600.CORE-TELEPHONY-118
-----------------------------------------------
1. Unable to configure Internal Autodial feature using the Element Manager
on a KEM/KIM. This update resolves the issue.
wi01113497
Software update BCM450.R600.BEM-115
-----------------------------------
1. Webpage modification for Windows-8 support
BCM webpage has been modified for supported components
wi01093900
Software update BCM450.R600.DSP-FIRMWARE-114
--------------------------------------------
1. T38 Fax fails when CNG tone is received after T38 switching.
Inbound T.38 fax calls are failing to the Avaya BCM450 when going through
the CS2KCombo gateway using VSP3. This update ignores the CNG tone received
by BCM from the far-end after T38 switching has happened, allowing the call
to be answered correctly.
wi01060639
Software update BCM450.R600.CDR-113
-----------------------------------
1. CDR Live Data sent by the BCM has some elements missing.
This issue happens for long calls where there is huge call data. The part of
Cdr server which is responsible for sending the data to live clients, is not
able to cope up with huge call data. This update resolves the issue.
wi01077410
2. Element Manager disconnects when clicking on CDR.
This issue was occurring due to presence of special characters and control
characters in MostRecentFailureReason field. This update resolves the issue.
wi01019177
Software update BCM450.R600.SRC 110
-----------------------------------
1. Warning message appears when a set which is configured
Professional recording all calls performs paging.
When a call performs paging, the underlying components could not satisfy the
professional record call request. As a result, the PCR will receive an error
message from the underlying components. The change is made in the PCR component
to avoid to issue any professional record call reuqest when a call is in paging.
wi01058289
2. SR 1-3617118047 PCR feature trying to record calls answered by Application Dns
Professional call recording feature tries to record calls which are answered by
application DNs.
wi01007452
3. Professional Call Recording feature ceases functioning for entire
system when single IP set is deregistered
SRC (Professional Call Recording) depends on CTE component to do the call
recording. The issue was SRC was blocked on a CTE function calls and it could
not handle the other call recordings. The fix was to unblock SRC under
error condition.
wi00966661
4. PCR In the recorded audio file the first 90 seconds or so is missing
The root cause was that SRC (PCR) was blocked in a CTE function call and was
delayed to handle the other call recording. The fix was to unblock SRC from
CTE function and made it available to handle the other recordings.
wi00935893
5. BCM stops sending PCR emails
The root cause was that the call recordings were not made due to SRC (PCR)
blocked on CTE function calls and therefore no emails were sent. The fix was
unblock SRC from CTE function calls.
wi00959359
6. Unnecessary alarms are causing issues with reporting tools
Certain events are triggering alarms that contain irrelevant debug information.
This information is causing issues with reporting tools used to monitor
alarms. This update prevents those alarms from being displayed.
wi00874947
7. False alarm raised due to a wrong alarm id mapping
An incorrect alarm id mapping is found in TACS service functions and as
a result, a critical alarm is raised by an irrelevant event.
wi00836160
8. Emailed recordings are incomplete
Professional call recording is configured to forward recordings via email.
The recordings are not complete. This update should ensure the complete and
correct recording is captured.
wi00850243
9. Stop Professional call recording via F996
The fix provides a manual method to stop a call recording by pressing Feature 996
when the call recording is in progress.
wi00864355
Software update BCM450.R600.CORE-TELEPHONY-112
----------------------------------------------
1. Tandem calls drop after 15 seconds when **OPTION is active.
Tandem call gets dropped when the toll fraud monitor feature is turned ON
on the tandem node irrespective of the restrictions getting passed.
This update resolves the issue.
wi01069915
Software update BCM450.R600.SCD-109
-----------------------------------
1. IVR Services fail to start
There are instances where IVR cannot be enabled correctly and the IVR
services fail to start. A configuration file is missing information on the IVR
services and cannot switch them from a disabled state to an enabled state. After
applying this update the system will reboot and the IVR services should
start correctly.
wi01078232
2. BCM will not allow access to HTTP hosted file ending in .cfg.
This update resolves this issue by making changes in the
AliasMatch settings for *.cfg in ivr.conf file.
wi01063072
Software update BCM450.R600-IPTEL-108
-------------------------------------
1. No speech path on CFNA which redirects from SRG to CS1K CP via SIP.
External calls coming into SRG IP set via PRI are forwarded to CS1K
voicemail (Callpilot)over SIP.When Voicemail answers ,neither is the user
able to record the message nor,the DTMF digit (5 = shortcut) is recognised
to go to the record while the greeting is playing.This updates resolves
this issue by handling the BCM's internal streams media for a specific event.
wi01052802
Software update BCM450.R600.BEM-99
-----------------------------------
1. 64 bit support for CallPilot Desktop Messaging
This update makes two separate links avaialable for CallPilot Desktop
Messaging download on the web page- one for 32-bit OS and the other
for 64-bit OS.
wi01051652
Software update BCM450.R600-IPTEL-105
------------------------------------
1. When BCM sends 480 to drop the a SIP trunk call message doesn't contain
Reason header. This update resolve the issue by adding reason header field
for following 3 SIP responses.
404 Not found.
480 Temporarily unavailable.
503 Service unavailable.
wi01048437
2. User cannot enter more than 16 characters in STUN Server Address field in
Element Manager.This update resolves the issue by changing the STUN Server
Address field length to 32 characters.
wi01063802
3. Tandem Fax through SRG to CS1K CallPilot fails intermittently. The root
cause is due to the change is message sequence after upgrade,BCM opens a RTP
stream with ip address 0.0.0.0.This update resolve the issue by changing BCM
behavior so hat it opens RTP socket only after receiving proper transport info.
wi01046443
4. BCM calls Auto Attendant and on auto Attendant prompt, dials the number to
transfer the call to CM station. When the call is transferred to a CM
station there is no speech path between BCM and CM station.
This update resolves the issue.
wi01033678
5. If the BCM receives an event 415 during the setup of the call, then BCM
gets stuck in a loop of invites that can only be cleared by restarting feps.
This update resolves this issue by clearing a flag set by BCM for
sending re-INVITES.
wi01060571
Software update BCM450.R600.REMOTEX-INIT-104
-------------------------------------------
1. FMFM is not working after full system backup.
FMFM feature is not *re-enabled* after taking a complete backup of
the BCM. This update resolves the issue.
wi01061192
Software update BCM450.R600.UTPS-102
------------------------------------
1. Inclusion of UNIStim 5.5 0621C8Q,0623C8Q,0624C8Q and 0625C8Q
for IP phones i2007, 1110, 1120e and 1140e respectively.
062AC8Q for IP phones 1210, 1220 and 1230.
UNIStim Software Release 5.5 provides minor feature enhancements
and numerous quality improvements have been delivered with this
UNIStim 5.5 software release.
wi01064908
Software update BCM450.R600.SRC-98
-----------------------------------
1. SR: 1-3824348881: PCR feature generating "Failed to record a call" alarms
regularly Professional call recording feature fail to record calls which are
forwarded from application DNs and raised the "Failed to record a call" alarms.
wi01042611
Software update BCM450.R600.CORE-TELEPHONY-96
---------------------------------------------
1. No OLI from BCM50 to BCM450 Trunks.
BCM 50 R6 connected to BCM450 R6 using either H323 or Sip trunks in direct
mode does not send OLI from BCM 50 out over the PRI lines connected to the
BCM450 R6
wi01013669
Software update BCM450.R600.UTPS-92
----------------------------------
1. Inclusion of UNIStim 5.4 0621C8L,0623C8L,0624C8L and 0625C8L
for IP phones i2007, 1110, 1120e and 1140e respectively.
062AC8L for IP phones 1210, 1220 and 1230.
UNIStim Software Release 5.4 provides minor feature enhancements
and numerous quality improvements have been delivered with this
UNIStim 5.4 software release.
wi01052685
Software update BCM450.R600-IPTEL-90
-----------------------------------
1. An incoming call is answered by Auto-Attendant on the BCM450, which transfers
the call to the BCM50's set via SIP. The set has CFNA configured to BCM450's
centralized Voicemail. There was no voice path between the originating set and
the centralized voicemail. This update resolves this issue.
wi01035836
2. Outgoing call to mobile phone doesn't have speech patch when connecting to the
mobile mailbox for some of the subscribers.During error conditions the MCDN queue
was not getting refreshed. This update resolves this issue.
wi01036508
Software update BCM450.R600.VOICEMAIL-88
----------------------------------------
1. Voice Mail Message Forwarding feature activation issue
After applying the Kernel patch BCM450.R600.KERNEL-83-1,
Desktop Messaging (DM) Keycodes are not activated. Because of
which Message forwarding feature is not getting enabled in
CallPilotManager. This update corrects the issue.
wi01045439
Software update BCM450.R600.VOICEMAIL-87
---------------------------------------------
1. An user logs into a MeetMe conference by entering access code and presses
'#', and if he eventually waits then all IP sets will go down. This happens
only for Italian and Danish languages under CallPilot. This update will
correct the issue by making appropriate changes to Italian and Danish text prompts.
wi01028725
Software update BCM450.R600.IPTEL-86
---------------------------------------------
1. BCM continues to send re-INVITE to far-end after call termination
once it received 415 response to a mid call request.
This update resolves this issue.
wi01016963,wi01009950
Software update BCM450.R600.SNMP-PROVIDER-85
---------------------------------------------
1. SNMP service not running after reboot of BCM
SNMP service will not be running after the BCM reboot.
This update will start the service if SNMP is enabled,
once the BCM is rebooted.
wi01034878
Software update BCM450.R600.KERNEL-83
---------------------------------------------
1. System rebooted on its own
System resets on its own and reboot reason is "Hardware Watchdog".
This patch has following diagnostic changes and fixes:
>PMEM (persistent memory) is enabled.
>Checks Decrementer against 0 in idled task and fixing it.
>Checks if interrupt is enabled and fixing if not.
>Checks if Hard IRQ is enabled and fixing if not.
>Checks if Soft IRQ is enabled and fixing if not.
>Ensures watchdog kick every 10ms at most.
>Ensures 10us delay between the completion of the SPI transaction and the
de-assertion of the chip select.
wi01029594
Software update BCM450.R600.CORE-TELEPHONY-84
---------------------------------------------
1. SIP Trunks get locked up
When incoming SIP call contains the digits that match the destination/called
systems destination codes and there is no Remote Access Package allowing the
tandem call, the SIP trunks get locked up. This update resolves the issue.
wi01022176
Software update BCM450.R600.VOICEMAIL-81
----------------------------------------
1. Message waiting indicator stops working. Customer cannot detect if he has new
messages until he checks by using the feature code. After checking it starts
working again. This update will correct the issue by correcting the behavior of
a flag.
wi01001943
2. Message Forwarding .From. Email address field is not applied to emails sent.
When using Message forwarding, voice messages are not getting forwarded when
"From" E-mail address is configured in CallPilotManager with BT SMTP server.
This update will correct the issue.
wi01016602
Software update BCM450.R600.SCD-80
----------------------------------
1. The gen.cfg file could not be transferred in Element Manager using the.
Transfer File to My PC. option. This update resolves this issue by making
changes in the AliasMatch settings for *.cfg in oam.conf file.
wi01015143
Software update BCM450.R600.IPTEL-77
------------------------------------
1. Sigma sets registered to CS1K experience no voice path when call sender feature
is used due to a glare situation.This update resolves the issue.
wi00963891
2. H323 Calls that are redirected back to the Centralized voice Mail on the CS1000
are getting no speech path at times.
This update resolves the issue.
wi01011038
3. CS1K sets can't transfer BCM calls to another CS1K set, as BCM was not handling
codec switch from G.729 to G.711 during transfer of H323 calls.
This update resolves the issue.
wi01017130
Software update BCM450.R600.CORE-TELEPHONY-76
---------------------------------------------
1. AA answers in half the ring cycles configured for Sweden market profile.
In Sweden market profile,the Autoattendant is configured to answer incoming
calls after 12 rings. However,the call gets answered by the AA after 6 rings.
This update resolves the issue.
wi01002772
Software update BCM450.R600.CORE-TELEPHONY-74
---------------------------------------------
1. Call forward to Broadcast Hunt Group does not work.
When an analog incoming call on a set gets forwarded to broadcast
HG where all the members of the HG also have the appearance of the incoming
analog trunk, then call is not presented to the HG members.
This update resolves the issue.
wi00990603
2. Failure in SIP call when 3rd party sip server is used
Intermittent call failure is observed between a third party CC Server(Voxtron)
and BCM.In bad call scenario call stays established without a speech path.
voicestream goes only from Voxtron to client.voicestream from client to Voxtron
is missing.This update corrects the issue.
wi01003207
3. Background Music not working on i200x p2
Background music does not play on IP sets intermittently when F86 (background
music feature)is turned on.This update resolves the issue.
wi00856010
Software update BCM450.R600.VOICEMAIL-73
----------------------------------------
1. Messages forwarding original message not being deleted on Read/Delivery
Message forwarding has been configured to delete/read messages from the user's
mailbox when opened by the recipient. The message are being delivered and we
can see the read receipt being returned to the BCM. But the BCM does not
delete/read the original message. The problem is with delivery and disposition
notification status. While parsing the last message mime file it does not match
with the disposition notification status and the message will not marked/deleted
on opened and delivered. This update now handles the DSN properly to make sure
it's not NULL.
wi00973812
2. RCC download gets stuck due to bad XML
The RCC gets stuck whenever it gets the NULL priority Info for Skillset call.
This update corrects the problem by resolving the NULL priority info issue.
wi00989640
Software update BCM450.R600.IPTEL-72
---------------------------------------
1. SIP call from BCM50 to B5800 Sigma (Distributed) that is blind
transferred to CS1K UNIStim gets dropped when CS1K UNIStim phone
answers the call.
This update resolves this issue.
wi00958976
2. There is no voice path on SIP call originating from BCM to B5800
which is forwarded to CS1K because BCM is not able to send a re-INVITE
with proper IP address in SDP.
This update resolves this issue.
wi00977946
Software update BCM450.R600.SAMBA-71
---------------------------------------
1. System Backup on Network shared folder on Win Vista and higher
release fails
System backup fails as the smb.conf file was not updated. This
patch updates the smb.conf file and facilitates backup on network
shared folders of Win Vista or higher release.
wi00971338
Software update BCM450.R600.ELEMENT-MANAGER-69
------------------------------------------------
1. IP Trunks in BCM 6.0 Element Manager shows Non-supported CODEC (G723).
User can choose G723 as a supported codecs though it's not
supported.
This update resolves the issue by removing the G723 option from the IP Trunks.
wi00985401
Software update BCM450.R600.INITRD-68
---------------------------------------
1. Raid fails when primary HDD is restored by Acronis True Image 2011 or later
Disk mirroring fails when primary HDD is imaged using Acronis TI 2011 or
later as it bloats up the partion table to entire HDD. This patch removes
the disk consistency check and removes a bug which existed in disk size
check.
wi00966296
Software update BCM450.R600.IPTEL-67
---------------------------------------
1. Local call on BCM50R6 when blind transfered to B5800
over SIP results in one way speech path.
This update resolves this issue.
wi00966201
2. Call between BCM and Meeting Exchange over SIP fails, when
originating BCM supports MCDN over SIP.
This update resolves the issue.
wi00853708
Software update BCM450.R600.ELEMENT-MANAGER-66
------------------------------------------------
1. Non-supported CODEC (G723) showing as available in BCM 6.0 Element Manager.
User can choose G723 from a drop down list of supported codecs though it's not
supported.
This update resolves the issue by removing the G723 option from the list.
wi00969934
Software update BCM450.R600.IPTEL-63
--------------------------------------
1. Call coming into PRI on SRG and in normal mode, are CFAC to set in Normal
Mode. Set on the CS1000 then has a CFNA set for 3 rings to Voicemail.
At times, the call forwards to mail but has one way speech path.
This update resolves this issue.
wi00950886
Software update BCM450.R600.BCM-to-IPO-Migration-61
------------------------------------------------------
1. Migrate the existing 1120, 1140, 1220 and 1230 series UNIStim sets
to SIP based sets.Sets should also redirect themselves to the IPO
when BCM/SRG is replaced with an IPO without manual intervention.
When the TFTP server is ready user can navigate to a specific area of
EM(Configuration->Resources->IpSets->Migrate Sets to IPO )and provide
the IPO IP address. This TFTP address is persistent and can retain its
value across BCM/SRG reboot and EM restart.
DHCP server should be turned OFF in case IP sets are in DHCP ON mode
and user wants to use a different DHCP server (other then BCM or Third
party DHCP server) just before actual migration starts.
User should press the "Migrate Now" button to start actual migration
process and all supported sets will reboot.Upon reboot UNIStim sets
will be able to send Read Request to the IPO (provisioned IP address)
and download the configuration files. Sets are capable of reading
configuration files and download SIP firmware and redirect themselves to an
IP as per device configuration.
wi00932546
Software update BCM450.R600.CORE-TELEPHONY-64
---------------------------------------------
1. FMFM functionality fails on analog trunks
Find me Follow Me(FMFM) feature fails on analog trunks after applying
BCM450 R600.core-telephony-44. When the analog phone answers the
call, the extenal caller gets dead air.This update corrects the issue.
wi00954113
2. Crosstalk on IP sets when outgoing calls are made over PRI trunk.
Crosstalk is heard on the IP set when an autodial key, configured with
the destination code is pressed to make an outgoing call on the PRI
trunk. This update corrects the issue.
wi00960056
3. Coretel crash due to invalid TN (logevent 115)
This update corrects the referencing of NULL message pointer which results
in a crash of the core telephony component.This update corrects the issue.
wi00961755
4. Feature icons may not be retained in KEM/set keys.
Feature icons will not retain in KEM keys or set keys, when any key is
programed or reprogramed. This update resolves the issue.
wi00945990
5. Intermittently one-way speech with Meet-Me conference
Intermittently a one way speech path may occur when setting up a 3 party
conference CALL. If a conference member mutes himself and then disconnects
from the conference, speech resources are not properly cleaned up. If
members of a subsequent 3 party conference use this improperly released
resource they may experience one way speech path.
When a meet-me conference mutes himself and then goes into hold, now all
the participants in the conference drop the call, the held participant
will be released by the conference Server. The conference resource used
by him remains in MUTE state. So for the next conference in the system
whichever participant is allocated with this MUTED.
This update corrects these issues.
wi00961314
Software update BCM450.R600.VOICEMAIL-62
----------------------------------------
1. The Message Waiting Indicator (MWI)does not display intermittently
This improper behavior is caused due to delay in execution of semaphore
requests issued by voicemail to kernel. This update will correct the issue.
wi00955199
2. (RCC) 2.45.101, 103, & 104 download stops with CannotConnecttoDB
For Caller Input rule configuration, step number greater than 20 was causing
RCC download to stop. Maximum permissible value of step number is 20 and a
value greater than that should not be allowed.
This update checks the step number value and if it is greater than 20, it is
defaulted to 1.
wi00728870
3. BCM all versions - # or * input rules stops RCC (Microsoft SQL based)
download
Customer was using # and * as single character, fixed length caller input
rule for CC calls. These two characters are to be used as wildcard
characters. This update has blocked the usage of # and * as caller input
rules because these are wildcard characters and the BCM reserves a different
meaning for them. Introduced a change in the GUI text prompt appropriately.
wi00728869
4. RCC is not able to download call data from the BCM due to Invalid XML data.
The RCC download of new call data will stall when invalid Physical Line values
i.e... physical line value > 999 is received. This issue is resolved by
introducing a check for valid range of physical line allowing RCC to download
the call data.
wi00856055
Software update BCM450.R600.UTPS-59
-------------------------------------
1. Inclusion of UNIStim 5.3 0621C8J,0623C8J,0624C8J and 0625C8J
for IP phones i2007, 1110, 1120e and 1140e respectively.
062AC8J for IP phones 1210, 1220 and 1230.
UNIStim Software Release 5.3 provides minor feature enhancements.
Five customer reported cases have been closed and numerous quality
improvements have been delivered with this UNIStim 5.3 software release.
Visit D2GMTgvRQ2QJjrfkNG5YTnJ4kSxqKJvL9RnN8hRY32SYhGJws8Vr!170487718 for the
detailed bulletin.
wi00964544
Software update BCM450.R600.KERNEL-56
---------------------------------------
1. Ethernet packets with VLAN tag drops
BCM450 drops incoming full sized ethernet packets with VLAN tag because the
ethernet driver was not capable of handling full sized packets with VLAN
tag. This update fixes this issue.
wi00937733
Software update BCM450.R600.KERNEL-45
---------------------------------------
1. System rebooted on its own.
System reboot on its own and reboot reason being "Hardware Watchdog".
This issue is seen because of power save feature enabled in CPU.
This update fixes the issue by disabling the power save feature in CPU.
wi00868045
Software update BCM450.R600.TIMEZONE-50
---------------------------------------
1. DST Cancellation for Russia
On February 8, 2011, cancellation of DST in Russia was made official.
An hour was added in March 2011 for the last time, and clocks will not
move back again in the fall. This fix updates OS package to accommodate
this day light saving cancellation.
wi00941901
Software update BCM450.R600.IPTEL-46
-------------------------------------
1. One way speech path is observed when an active call on an IP set is
blind transferred to the far-end BCM over SIP.
wi00889555
Software update BCM450.R600.UTPS-42
-----------------------------------
1. Unistim 5.2 supports the Sets with New LCDs which will be released as part
of the Cost Reduction Program.UNIStim Software Release 5.2 delivers quality
improvements for all IP Deskphones including software fixes for over sixty
work items, and resolution of seven customer reported cases.
It fix following isssue,
During speakerphone conference calls using 2007 IP Desk phone, the 2007 may
beep and mute itself after some period of time.
Inclusion of UNIStim 5.2 0621C8G,0623C8G,0624C8G and 0625C8G
for IP phones i2007, 1110, 1120e and 1140e respectively.
062AC8G for IP phones 1210, 1220 and 1230.
wi00909252
Software update BCM450.R600.CTE-41
-----------------------------------
1. CTE client intermittently can't connect to BCM
Attempts by the TAPI client to connect with the BCM fails due to a
CoreTel timeout. This timeout occurs because the LAN CTE device table has
been improperly populated with a secondary station index.
Wi00879939
Software update BCM450.R600.CORE-TELEPHONY-32
----------------------------------------------
1. Analog trunk lockup for UK market profile
An enhancement which allows the end user to set the disconnect supervision detection time
for the UK market. The lockups were occurring because the PSTN was sending a disconnect
event that was too short to be detected.
wi00728913
2. PRI Lines cannot be assigned to BlocA
Change VoIP lines from BlocA to BlocB and try to move PRI Lines to BlocA.
The PRI lines cannot be assigned to BlocA and the only available options are BlocB through F.
wi00830849
3. KEMs reboot when moving lines using Feature *81
On sets with 3 or more KEMS connected using Feature *81 to perform multiple line moves
can cause all KEM modules on the phone to reboot forcing previously moved lines back
to their original location.
wi00817292
4. Cannot select facility for External Autodial in EM
When programming an autodial using Element Manager one
is not prompted to enter what facility should be used
(Routing Table, Prime Line, Line Pool).
wi00728895
5. When TAT call is answered held call is dropped.
A call from BCM1 to BCM3 (tandemed through BCM2) is rerouted back to
BCM2. TAT happens between BCM2 & BCM3 and the corresponding trunks
are released. Now, when the call is put on hold (Hold_normal), the
trunk (from BCM2 to BCM1) releases the call.
wi00881330
6. Unable to leave VM when Telephony Audio Collection Service is activated.
When the Telephony Audio Collection Service (TACS) feature is invoked on a
set and we try to invoke any Voice mail on the same set, the voice mails
sent to the called set do not get delivered.
wi00869535
7. Sets can only answer 1 call at a time even if multiple intercom keys are configrued.
A Set is configured with Multiple Intercom keys. The first call lands on
the set through a TANDEM scenario involving TAT. When a second new call
comes in, instead of appearing on the next available intercom key, the
call appears/blinks on the same intercom key where the first call is
present.When we try to answer the second new call by pressing the
blinking key the second call doesn'tget answered. This only affects
incoming calls.
wi00873407
8. Element Manager hangs when changing T1 line type.
When chainging T1 trunk types for Inactive T1 channels Element manager can
hang for 5 minutes before the operation compoets. Only one line can be changed
at a time. One He must reboot the BCM in order to configure the next line.
wi00862425
9. Analog Set will ring continuously (FNA) or provide dead air (FB).
A Call comes into an analog trunk of the SRG50 5.0. The trunk rings on
a Normal Mode set registered to the CS1K's Signalling Server. The Normal
Mode set is configured to forward calls to analog set on the SRG50. The
Analog Set is configured to Forward No Answer or Forward Busy calls to
the CS1K's CallPilot. The signalling protocol used on the IP Trunks is SIP.
When the Analog Set is busy the caller receives dead air.
When the call is forwarding with no answer the set continues to ring continuously.
wi00854371
10. Intermittent incoming call drops when ringing Call center agent at BCM.
Intermittent incoming PRI calls to Call centre agents are dropped when answered.
wi00882451
Software update BCM450.R600.CORE-TELEPHONY-12
----------------------------------------------
1. 8x16 has 4 ports stuck in enabling
After upgrade to BCM 6.0 the upper four ports of an 8 port
analog trunk card will not enable. This affects GATM 8,
8x16, and ADID8 modules.
wi00728891
2. On hold calls drop when attempting to pick up.
Tandem calls dropped after being placed on hold when
TAT feature is enabled
wi00728884
3. No ring back on tandem calls
Incoming target line calls to a BCM 450 that tandem over
point to point T1 trunk trunks to a BCM 50 ring twice
then disconnect if not picked up within the 2 rings.
The calling party does not hear ringback tone.
wi00819848
Software update BCM450.R600.VOICEMAIL-36
-----------------------------------------
1. BCM 450 French Language issue with Mailbox Manager
Many of the Mailbox Manager pages, mostly help pages, had text in
English even when French language was selected as the primary language.
This update corrects this problem by translating all English text
to French.
wi00864347
Software update BCM450.R600.IPTEL-37
------------------------------------
1. IP trunks lock up during improper disconnect sequence.If, during a call
disconnect the far end closes the TCP / IP socket before the BCM can respond,
The H.323 trunks may locked up requiring feps to be restarted to recover.
The issue is observed only when BCM 6.0 is working in tandem with CS1K 6.0.
wi00861540,wi00877628,wi00881033
2. Fax failures on tandem calls to SRG 7 or 10 digits incoming fax calls
from PSTN to CS1K, tandeming to SRG fail most of the time. Fax machine
rings but it does not transmit.
wi00867164
3. One way speech path when call transferred or placed on hold.
When a user transfers or unholds a call BCM was not sending authorization
information along with Re-INVITE. This results in no speech path.
wi00877314
4. Cannot make calls out of system after applying BCM450 R6.0 IPTEL-19.
Route information is not formed properly in the INVITE message.
The data structure used to copy the Route information was not proper.
wi00880016
5. Incoming call blind transferred to PSTN has no speech path.
wi00890769,wi00890904,wi00890905
6. BCM SIP Fallback to PSTN too slow on WAN failure
When the WAN connection is down, every attempted SIP call takes ten seconds to fail over.
Wi00729213
Software update BCM450.R600.IPTEL-19
------------------------------------
1. Alarm 10005 keeps occuring every 4 minutes if the keycode for IP Trunks(includes
SIP trunk also) is not applied.
wi00829683
2. PSTN calls to SRG along BRI trunk is answered by a set in Normal mode. When the
call is transferred to another set in Normal mode, there is only one-way speech
path.
wi00728988
Software update BCM450.R600.ELEMENT-MANAGER-38
----------------------------------------------
1. User can now turn call audit mechanism on or off for H.323 trunks by
checking or unchecking the "Enable Q.931 Status Enquiry" flag in
Element Manager. This flag has been added to the Configuration section
of the Settings panel for H323 Trunking. This mechanism should be used
if the BCM is experiencing "locked" or "hung" H.323 trunks. In order for
this Element Manager enhancement to function, the BCM must also be
running BCM450.R600.IPTEL-37.
WI00887080
Software update BCM450.R600.RECOVERY-39
----------------------------------------
1. The Sftp transfer fails for big sized backup files.
The scheduled SFTP backup transfers the partial backup file to server if backup size is
large (>100MB). This is because of premature death of ttyw window.
This update resolves this issue by running the "SCP" command on the background thus not
allowing the "ttyw" component not to be killed.
wi00904134
Software update BCM450.R600.DSP-FIRMWARE-28
-------------------------------------------
1. BCM 6.0: Echo on IP calls during double talk
This update makes adjustments to the DSP echo canceller parameters
for detection of double talk (2 people speaking at once) and regular echo
(single talk) to minimize echo on calls to the public network.
wi00873480
Software update BCM450.R600.SRC-MPS-26
--------------------------------------
1. False alarm raised due to a wrong alarm id mapping
Once the TACS service starts, a wrong alarm is sent to Element Manager
which causes wrong indication of the service.
It was discovered that an incorrect alarm id mapping is found in TACS
service functions and as a result, a critical alarm is raised by
an irrelevant event.
wi00832739
2. Unnecessary alarms are causing issues with reporting tools
Certain events are triggering alarms that contain irrelevant debug information.
This information is causing issues with reporting tools used to monitor
alarms. This update prevents those alarms from being displayed.
wi00874948
Software update BCM450.R600.UTPS-31
-----------------------------------
1 i2050v1 & i2004P1 sets fails connecting to the server
i2050 v1 & i2004P1 phones do not support the IT capability query, which
was blocking its boot up process and as a result fails to connect to
the server. This has been rectified by implementing a fix. So if an
IP Phone does not reply back to the IT capability query in 5 seconds,
then it is booted up without the AG2000 support for that phone.
wi00886844
2 The first few seconds of conversation is muted for calls to IP sets.
When calling 12xx IP set, the called party speech is muted
for the first 0.5-1.5 seconds due to delayed acknowledgement from
12xx set to BCM for setting of speech path.
Inclusion of UNIStim 5.1 solves this issue.
0621C8D,0623C8D,0624C8D and 0625C8D for IP phones i2007, 1110, 1120e
and 1140e respectively. 062AC8D for Ip phones 1210, 1220 and 1230.
wi00867619
3 Too long RUDP re-transmission worsens the muting problem at beginning
of call with lost RUDP packet.
This update corrects a condition where RUDP re-transmission
time (1.5s) is too long.
The issue is resolved by changing the timeoutLength value.
wi00831409
4 SetCookie message support for BCM
In order to support the AG, the Call Server team needs to implement
the AG's standard registration model. For AG 2000 support, the only
mandatory cookie is the DN (extension number).
With this fix AG standard has been implemented.
wi00820254
Software update BCM450.R600.BEM-25
----------------------------------
1. CallPilot: Outlook 2010 support should be mentioned on the HTML download page.
CallPilot Desktop Messaging - Microsoft Outlook 2010 is supported from version
05.00.41.112. This information has been updated in the CallPilot DM download page for BCM.
wi00868723
Software update BCM450.R600.ELEMENT-MANAGER-24
----------------------------------------------
1. Scheduled Service not in Day of the week order
Scheduled Services shows day of the week list in alphabetical Order and
not in day of the week order.This update corrects to display in day order.
wi00848324
2. System speed dial are sometimes deleted when clicking on the next line in Element Manager
There is a race condition between the Edit Event and Select Event. When
editing a row, if the next row is selected to quickly, the edited entry will be deleted.
This update will resolve this issue.
wi00873710
3. EM v.62.0.0 does not allow Shift 9 [(] and Shift 8 [*] to be used as a characters
in system passwords. Instead Shift 9 & 8 key presses are instead considered as
shortcuts for opening and closing the Network Element view respectively.
This update will resolve this issue.
wi00873719
Software update BCM450.R600.VOICEMAIL-17
----------------------------------------
1. Mailbox Manager does not give you the option for French
Textprompt in Mailbox Manager did not appear in French when the French
language was selected. This update rectifies this by introducing French
translation for the prompts appearing in English.
wi00856432
2. Unable to use F989 or Voicemail
When F989 is used to record a call, the temporary copy of the recording
does not get deleted. This blocks a lot of BCM disk space and in the long
run, there was no space left for new calls/messages to be recorded. This
update deletes the temporary copy of the recording from the BCM thereby
resolving the hard disk space issue.
wi00856426
Software update BCM450.R600.CTE-LMS-16
--------------------------------------
1. BCM Monitor does not display E&M lines in use, if the line number
is higher than 150. E&M trunks are working fine but do not display
when in use in BCM Monitor.This update corrects the issue by checking
the Line Number against the lowest possible Target Line Number - 1.
wi00819867
Software update BCM450.R600.INITRD-15
-------------------------------------
1. RAID does not start properly, red LED is displayed and Alarm 63004 is raised.
When adding or replacing an HDD (Hard Disk Drive) in a RAID (Redundant Array
Independent Disk) system, the synchronization process fails and the RAID LED
remains solid RED. HDD's will not synchronize and Disk Mirroring Operational Status
shows "Inactive". Issue occurs when the HDD partition sizes did not match.
This patch will resolve the issue and allow synchronization when HDD partitions do not match.
wi00840944
Software update BCM450.R600.ELEMENT-MANAGER-14
----------------------------------------------
1. Using java 1.6_18 or greater, dialogs that contain a password field can
transfer incomplete data to the BCM. If the OK button is clicked
immediately after the password is entered ( without entering the password
again for verification), the password entered is not sent to the BCM.
BCMRELEASE-1077
Software update BCM450.R600.IPTEL-13
------------------------------------
1. CS1K SIPline calls to BCM UNIStim phone. The call is then blind transferred to a
BCM TDM phone. There is no voice path and the status on SIPLine phone is Remote
On-hold
wi00841043
2. Some SIP call servers and service providers do not correctly handle the maddr
parameter in the Request-URI. The presence of this parameter can cause calls to
fail. With this fix, the maddr in R-URI parameter can be disabled to facilitate
successful call completion to affected servers and/or service providers.
BCMRELEASE-1097
Software update BCM450.R600.CORE-TELEPHONY-8
---------------------------------------------
1. IP set display is inconsistent across IP set models
The key description for IP sets is inconsistent across different IP set models.
For example the description for an intercom key on an 1120 set says "IC" + the set DN
wile on an 1140 the description says "Intercom"
BCMRELEASE-1074
2. SIP calls to PSTN through BCM fail if longer than 10 seconds
wi00729169
3. MWI, tone OR lamp, for analog phones on ATA2 not working.
Q02079632-02, wi00728926
Software update BCM450.R600.IPTEL-11
------------------------------------
1. No speech path on a call from CS1K_IPset to BCM set that is set CFAC to CS1K_CallPilot.
Outbound SIP trunk does not respond to UPDATE when inbound trunk has not yet negotiated
SDP via 100rel.
wi00733826
Software update BCM450.R600.IPTEL-7
-----------------------------------
1. SIP Standard Caps Exchange broken in some tandem calls.
wi00729216
2. BCM sending SIP INVITE request to the IP address different than the one with
which it got registered successfully.
wi00828944
3. BCM fails to acknowledge the SIP Response if an outgoing call to SIP-T
customer is not answered and far end tries to clear the call with a 480
response.
WI00825476
4. BCM should not treat SDP version as old when session id has changed
wi00732195
5. Ringback tone is not heard for the majority of the calls when dialling out
via Public SIP trunks and breaking out to PSTN.
wi00822623
6. BCM ignores the port information of the Contact-URI and sends INVITE to the
wrong port after receiving 302 response.
BCMRELEASE-1078
7. Calls from Skype clients produce non-numeric CLID. FEPS does not handle
non-numeric CLID very well and encodes the non-digit characters as digits
into VDI message and passes to CoreTel.
BCMRELEASE-1089
8. BCM-sip-SM-CS1K-cfac-SM-OneX - 1 way speech from OneX to BCM
wi00774905
9. CS1K_1_IPSet calls SIP to BCM_2050 blind transfers to SM_client with no
speech path
wi00819523
10. Call resumed with no media if transferred party doesn't answer call
wi00829858
11. CS1000:SW:LineTrunk:SIPInterop
wi00784193
12. No voice path when making call from CS1K_AE_set to BCM_set configured CFAC to SM_client
then CS1K_AE_set holds/retrieves the call
wi00828742
Software update BCM450.R600.UTPS-9
----------------------------------
1. 1200 series sets with factory firmware are not able to download firmware from BCM 6.0
and will not connect to the BCM.
wi00824900
Software update BCM450.R600.SU-2
--------------------------------
1. Recording very long calls using F989 Silent may cause IP sets to deregister
Under high load conditions, the IP sets may de-register when a
45 minute call is recorded using F989 that extension has a mailbox
with Message Forwarding enabled. The IP sets will quickly re-register.
This issue also causes Virtual Terminals to de-register affecting
Find Me/Follow Me meaning the Cte service must be restarted using
the Element Manager Service Manager.
BCMRELEASE-993
2. Call-leg transaction responses being ignored
(a) Possible loss of voice path between transferee and transfer
target when attempting to blind transfer over SIP trunk during
an outbound call in the ringing state.
(b) Possible codec renegotiation failure during transfer operations
over SIP trunks, resulting in loss of voice path.
BCMRELEASE-1021
3. Inbound ITSP association fails due to incorrectly statically provisioned DNS cache
Failure to associate some inbound ITSP calls could result in failure
to connect or failure to establish voice path (e.g. if NAT
compensation is required)
BCMRELEASE-1022
4. Connected identity feature is missing connected name on non-MCDN trunks
If connected-identity feature is enabled on non-MCDN trunks, only
connected number is delivered. Connected name is missing.
BCMRELEASE-1029
5. FEPS SIP trunk user account PAI overrides do not work with connected identity feature
If connected-identity feature is enabled on non-MCDN trunks and
PAI CLID and Display name is used at the SIP trunk user account
level the overrides do not take effect.
BCMRELEASE-1030
6. Private SIP trunk user account status collides with public SIP trunk user account
In case SIP trunk user account with the same SIP domain and CLID
is configured in both private and public domains SIP registration
status of the accounts does not reflect the real status. Both
accounts use the same persistent storage location to report the
status and one may overwrite the other.
BCMRELEASE-1031
7. Disable "maddr" contact parameter logic is reverse
The logic of "Suppress maddr parameter" option in EM is reverse.
When the option is turned on in the EM it is in fact turned off
in the IP trunking component and vice versa.
BCMRELEASE-1032
8. SIP accounts failed to register after upgrading BCM from 5.0 to 6.0
During migration from BCM 5.0 to BCM 6.0 existing SIP trunk user
accounts are migrated. Some new attributes of the accounts introduced
in BCM 6.0 are not initialized properly and are set at random. As
a result the operation of these accounts is unpredictable.
BCMRELEASE-1044
9. Remote Worker: No dial tone
One of remote IP set cannot get media. This is due to the wrong port sent
by UTPS in OpenAudioStream UNISTIM message.
BCMRELEASE-1058
10. Call transfer to VM stops working randomly
Call transfer to voicemail (feature 986) stops working on some phones, after
entering the mailbox number. The call is not transferred and it stays on hold.
Two lads were mistakenly using the same secondary station id, and as a
result the F986 request was not handled properly by the CTI. This update
resolves the issue.
Q02091765-04
11. SIP trunk diversion header does not get the CLID override treatment
The CLID will not be correct when using the CLID override as the SIP
trunk diversion header is not set.
BCMRELEASE-1057
12. SIP trunk call redirect fails when no transport param in contact
The outgoing call may fail due to a 302 SIP response causing a missed redirect
destination when the contact header gets ignored.
BCMRELEASE-1054
13. VoiceMail Read Receipts Enhancement to include Original Body of the Message
A VoiceMail Read Receipts Enhancement has to be made for the read receipt to include
the original message bodies with the receipt. This gives the user the ability to request a
read receipt from a person listening to a message and actually return the original message
back to the sender to tell them which message they listened to.
The voice or fax original message bodies are included in the read receipts and can be
listened to or viewed by F981 or Unified Messaging. This enhancement does not apply
to AMIS certified messages.
Q02032711-03
14. No CLID transmission on transferred calls to CS1k over H.323 trunks
When an incoming call to BCM transfers the active call
to a CS1K set over h323 with f70 feature, the incoming
line identifiers (CLID Information) are not transferred to customer.
Q02046221-05
15. Conference call is dropped
An incoming and outgoing trunk are conferenced together
through the BCM. When the set that joined teh tow parties
disconnects, the bridged call is dropped instead maintaining
the connection.
Q02115424-04
16. Remote sites don't not get Ringback tone
No ringback tone is audible to caller for outgoing tandem calls from
BCM to PSTN on T1 E&M trunks to a BCM4.0 although call is
actually ringing at the far end.
This update resolves the issue.
Q02118568-04
17. Non-BCM stations are not able to call BCM station if BCM station
has enabled the Find-Me feature
The problem occurs when a BCM station enables the Find Me in MM. The
call will fail unless another BCM station calls the BCM station with
the Find Me feature, the call will not succeed.
BCMIPOINTEROP-26
18. Direct pickup fails on SCS when call is originated from BCM
Attempts to pick up BCM calls by SCS over SIP trunk were blocked by
BCM not allowing REFER in unanswered state.
Q02102264-01
19. BCM <-> SCS interop: issue with Direct pickup on
SCS when call is external to BCM 450r1
An incoming PSTN call tandems via BCM over a SIP trunk to SCS
where it rings at set A. If, while set A is ringing, SCS set B
attempts direct call pickup, the call pickup will succeed but
there will be no media path connection.
Q02130340-03
20. Rotary Hunt Group not functioning correctly
When an incoming call is blind transferred to a rotary hunt group,
The first available set in the HG only gets a short ring blip, but
on completion of the transfer, the call rolls to the next available set.
Q02146813-01
21. Intermittent call drops when incoming calls are answered
Intermittently, incoming calls on analog lines are disconnected when
answered.
Q02091670-02
22. BCM Faxes stop working after 3 Days
Fax messages are failing due to a DSP lockup. This fix resolves
the issue
Q02111119-03
23. BCM Monitor cannot connect
BCM Monitor cannot connect due to secure sockets waiting to be closed
by other application.
BCMRELEASE-1055
24. Remote worker POP up window is not in proper format
The Remote Worker pop up window spacing is not correct.
BCMRELEASE-1079
25. RFC2833 support for i2050v4
RFC2833 defined DTMF tones are failing on i2050v4 with BCM.
BCMRELEASE-1062
26. ICC Calls in queue will not present to agents
ICC calls in queue are not presented to agents before being played
the Alternate message in the skillset mailbox.
BCMRELEASE-1065
27. T38 missing EOLs in RTC Bug fix
This change fixes the problem of missing EOLs in T38 on-ramp at the
end of Fax page transmission. There was a deficiency in T38 linker
layer which caused the number of EOLs (End of Line code) in RTC
(Return to Control) to be less than the standard number of 6. With
missed EOLs, some fax machines either reject the page or ask for
retransmission causing duplicate pages to be printed. By putting this
fix in place the number of EOLs in RTC in T38 on-ramp would be always
as same as the number of EOLs that the caller fax machine transmits.
Q02104860-02
28. BCM Monitor shows incorrect status of IP Trunks.
When an external outgoing call is made, from a set, and released quickly
before the far-end responds, then the trunk status under BCM Monitor is
shown incorrectly as active. This update resolves the issues as the necessary
code changes are made in CTE which updates the trunk status correctly.
Q02137864-04
BCM450.R600.CORE-TELEPHONY-1
----------------------------
1. This coretel update will prevent a NIL_TN destination timeslot
value from being passed to the kernel for a timeswitch connection.
Under heavy CPU load, the order of IP set shutdown messages received
from UTPS and MPS can create a scenario in which a NIL_TN value
may get used in a timeswitch connection. When the NIL destination
TN is passed to the kernel for a timeswitch connection, a system
error can occur. On the BCM450 platform, the error can cause a
CoreTel crash. On the BCM50 platform, the system does not crash,
but rather, writes into a random timeswitch location.
BCMRELEASE-1046
2. Call forward to Exchange UM fails with TRO on incoming call
An incoming call to the SRG is forwarded to the users set in Normal
mode on the main office. If TRO is active and the set actually has
Call Forward All Calls setup on the main office to the Exchange UM
server, the forwarded call will be disconnected.
This update includes the content of the following superseded Smart Update:
BCM450.R600.SU.System-021.201408
Authorized users can be download it at
Looks like the only change noted from SU 21 is the fix to the BASH security vulnerability.
The included readme:
Software Update Name: BCM450.R600.SU.System-022.201412
Applicable H/W Platforms: BCM450
Applicable S/W Platforms: 10.0
Category: GEN
Installation Recommendations:
This update should be applied to all new installations of BCM450 Release 6.0.
Existing installations should have this update applied if they are
experiencing any of the issues that are corrected. There is no need to
schedule specific maintenance to apply this upgrade if there are no
reported issues. In those cases, systems should be updated at the next
regular service opportunity.
Note: In order for the FMFM to work, user has to "Enable" the VAD manually by
following the below steps.
Step1:
Using set based admin login with the following info
Feature **266344
User ID: 738662
Password: 266344
Step2:
Go to "System prgrming>AnlgTrks VAD" and Enable/Disable VAD
After enabling VAD if the customer is facing LNR issue the Noise Floor
value in VAD has to be adjusted manually. Normally Noise Floor value > 590
resolves the issue.
Components and Versions:
bash 2.05b.2
bcmEMcartridge BCM450R6.ab52
bsp-kernel 6.1.3.7
cdr 6.1.1.281
core-telephony 6.1.1.28.48
cte 6.1.4.177
cti 52.0.136
dhcp-provider 6.1.1.3
dialogger 46.1.1.136
dsp-firmware 56.10.60.9.9
element-manager 62.0.3.109
elsie_timezone_32.tgz elsie_timezone_32.4
feps 6.1.57.295
gap 6.0.7
initrd 1.89.196
iptel-mrs 6.1.36.298
iptel-sas 6.1.4.126
iptelprovideragent 6.1.42.265
lms 6.1.1.146
log-provider 6.1.1.278
mgs 6.1.36.298
mof-db 1.90.109
mps 6.1.36.298
mpsmi 6.1.10.182
recovery 6.1.1.181
remotex 6.1.1.28
remotex-init 6.1.1.2
samba 3.0.5.2
scd 6.1.7.214
snmp-provider 6.1.2.249
src 6.1.2.4.7
system-release 10.0.2.62.279
utps 6.1.58.299
voicemail 60.1.25.285
webpage 6.1.4.71
Constituent Updates:
===================
New updates for this SU:
------------------------
BCM450.R600.BASH-135*
* It has not been released as an 'atomic' patch
Updates from previous SU:
------------------------
BCM450.R600.UTPS-133
BCM450.R600.IPTEL-129
BCM450.R600.CORE-TELEPHONY-128
BCM450.R600.DHCP-PROVIDER-127
BCM450.R600.CORE-TELEPHONY-124
BCM450.R600.VOICEMAIL-123
BCM450.R600.UTPS-120
BCM450.R600.REMOTEX-INIT-119
BCM450.R600.CORE-TELEPHONY-118
BCM450.R600.BEM-115
BCM450.R600.DSP-FIRMWARE-114
BCM450.R600.CDR-113
BCM450.R600.SRC 110
BCM450.R600.CORE-TELEPHONY-112
BCM450.R600.SCD 109
BCM450.R600.IPTEL-108
BCM450.R600.BEM-99
BCM450.R600.IPTEL-105
BCM450.R600.REMOTEX-INIT-104
BCM450.R600.UTPS-102
BCM450.R600.SRC-98
BCM450.R600.CORE-TELEPHONY-96
BCM450.R600.UTPS-92
BCM450.R600.IPTEL-90
BCM450.R600.VOICEMAIL-88
BCM450.R600.VOICEMAIL-87
BCM450.R600.IPTEL-86
BCM450.R600.SNMP-PROVIDER-85
BCM450.R600.KERNEL-83
BCM450.R600.CORE-TELEPHONY-84
BCM450.R600.VOICEMAIL-81
BCM450.R600.SCD-80
BCM450.R600.IPTEL-77
BCM450.R600.CORE-TELEPHONY-76
BCM450.R600.CORE-TELEPHONY-74
BCM450.R600.VOICEMAIL-73
BCM450.R600.IPTEL-72
BCM450.R600.SAMBA-71
BCM450.R600.ELEMENT-MANAGER-69
BCM450.R600.INITRD-68
BCM450.R600.IPTEL-67
BCM450.R600.ELEMENT-MANAGER-66
BCM450.R600.IPTEL-63
BCM450.R600.BCM-to-IPO-Migration-61
BCM450.R600.CORE-TELEPHONY-64
BCM450.R600.VOICEMAIL-62
BCM450.R600.UTPS-59
BCM450.R600.KERNEL-56
BCM450.R600.KERNEL-45
BCM450.R600.TIMEZONE-50
BCM450.R600.IPTEL-46
BCM450.R600.UTPS-42
BCM450.R600.CTE-41
BCM450.R600.CORE-TELEPHONY-32
BCM450.R600.CORE-TELEPHONY-12
BCM450.R600.VOICEMAIL-36
BCM450.R600.IPTEL-37
BCM450.R600.IPTEL-19
BCM450.R600.ELEMENT-MANAGER-38
BCM450.R600.RECOVERY-39
BCM450.R600.DSP-FIRMWARE-28
BCM450.R600.SRC-MPS-26
BCM450.R600.UTPS-31
BCM450.R600.BEM-25
BCM450.R600.ELEMENT-MANAGER-24
BCM450.R600.VOICEMAIL-17
BCM450.R600.CTE-LMS-16
BCM450.R600.INITRD-15
BCM450.R600.ELEMENT-MANAGER-14
BCM450.R600.IPTEL-13
BCM450.R600.CORE-TELEPHONY-8
BCM450.R600.IPTEL-11
BCM450.R600.IPTEL-7
BCM450.R600.UTPS-9
BCM450.R600 SU-2
BCM450.R600.CORE-TELEPHONY-1
Dependencies: BCM Release 6.0 version R6.0 1.02
Product Dependencies: None
Size: 89.83 MB
System Impact:
Time to apply approximately 10 minutes
Does update application force reboot: Yes
Over last Cumulative Smart Update: Yes
Over default content: Yes
Other Impacts: All services will be unavailable during the update until the system reboot completes.
Limitations: None
Other Impacts: None
Update Removable: No
New updates description:
------------------------
BCM450.R600.BASH-135
---------------------
1. BCM NCGL Bash Bug Vulnerability
GNU Bash versions 1.14 through 4.3 contain a flaw that processes commands placed after function
definitions in the added environment variable, allowing remote attackers to execute arbitrary
code via a crafted environment which enables network-based exploitation.
After applying this fix, the bash bug vulnerability issue exist in the NCGL will be resolved.
wi01194143
Previous updates description:
-----------------------------
BCM450.R600.UTPS-133
---------------------
1. Inclusion of UNIStim 5.5.2 0621C8V,0623C8V,0624C8V and 0625C8V
for IP phones i2007, 1110, 1120e and 1140e respectively.
062AC8V for IP phones 1210, 1220 and 1230.
wi01175704
BCM450.R600.IPTEL-129
-----------------------
1. Incoming Analog trunk call to BCM transferred to Call Pilot on CS1K over SIP
trunks Fails due to wrong media attributes updation in offer update message.
This updates resolves this issue by handling the BCM's internal media streams state.
wi01160417
BCM450.R600.CORE-TELEPHONY-128
--------------------------------
1. Coretel crash occurs when there is a VOIP fallback call with outgoing dial
digit length exceeding 24digits. It causes all the IP sets to reboot and alarm
logs show: 52004 **ERROR** FUMP channel not ready; MPS service aborted.
This update resolves the issue.
wi01153137
BCM450.R600.DHCP-PROVIDER-127
------------------------------
1. The DHCPProviderAgent fails to restart. The issue occurs because of
a large DHCP lease record size which caused the service to crash.
This update resolves the issue
wi01135384
2. The DHCPProviderAgent fails to restart.The issue occurs because of
a DHCP lease record buffer corruption which caused the service to crash.
This update resolves the issue.
wi01135386
BCM450.R600.CORE-TELEPHONY-124
-------------------------------
1. BCM digital user is not able to hear the announcement from CISCO service
provider, when the PSTN subscriber is not available.
This update resolves this issue.
wi01133072
Software update BCM450.R600.VOICEMAIL-123
------------------------------------------
1. During Restore form Factory default through EM, Mailbox Cabinets are
not getting cleaned up properly and thereby impeding same mailbox
creation on first attempt.
This update resolve the issue.
wi01123924
Software update BCM450.R600.UTPS-120
--------------------------------------
1. Inclusion of UNIStim 5.5.1 0621C8T,0623C8T,0624C8T and 0625C8T
for IP phones i2007, 1110, 1120e and 1140e respectively.
062AC8T for IP phones 1210, 1220 and 1230.
wi01124861
Software update BCM450.R600.REMOTEX-INIT-119
---------------------------------------------
1. Unable to make FMFM calls configured on TDM set with KIM module attached.
FMFM does not work after TDM set with KIM is unplugged and plugged back in.
wi01120599
Software update BCM450.R600.CORE-TELEPHONY-118
-----------------------------------------------
1. Unable to configure Internal Autodial feature using the Element Manager
on a KEM/KIM. This update resolves the issue.
wi01113497
Software update BCM450.R600.BEM-115
-----------------------------------
1. Webpage modification for Windows-8 support
BCM webpage has been modified for supported components
wi01093900
Software update BCM450.R600.DSP-FIRMWARE-114
--------------------------------------------
1. T38 Fax fails when CNG tone is received after T38 switching.
Inbound T.38 fax calls are failing to the Avaya BCM450 when going through
the CS2KCombo gateway using VSP3. This update ignores the CNG tone received
by BCM from the far-end after T38 switching has happened, allowing the call
to be answered correctly.
wi01060639
Software update BCM450.R600.CDR-113
-----------------------------------
1. CDR Live Data sent by the BCM has some elements missing.
This issue happens for long calls where there is huge call data. The part of
Cdr server which is responsible for sending the data to live clients, is not
able to cope up with huge call data. This update resolves the issue.
wi01077410
2. Element Manager disconnects when clicking on CDR.
This issue was occurring due to presence of special characters and control
characters in MostRecentFailureReason field. This update resolves the issue.
wi01019177
Software update BCM450.R600.SRC 110
-----------------------------------
1. Warning message appears when a set which is configured
Professional recording all calls performs paging.
When a call performs paging, the underlying components could not satisfy the
professional record call request. As a result, the PCR will receive an error
message from the underlying components. The change is made in the PCR component
to avoid to issue any professional record call reuqest when a call is in paging.
wi01058289
2. SR 1-3617118047 PCR feature trying to record calls answered by Application Dns
Professional call recording feature tries to record calls which are answered by
application DNs.
wi01007452
3. Professional Call Recording feature ceases functioning for entire
system when single IP set is deregistered
SRC (Professional Call Recording) depends on CTE component to do the call
recording. The issue was SRC was blocked on a CTE function calls and it could
not handle the other call recordings. The fix was to unblock SRC under
error condition.
wi00966661
4. PCR In the recorded audio file the first 90 seconds or so is missing
The root cause was that SRC (PCR) was blocked in a CTE function call and was
delayed to handle the other call recording. The fix was to unblock SRC from
CTE function and made it available to handle the other recordings.
wi00935893
5. BCM stops sending PCR emails
The root cause was that the call recordings were not made due to SRC (PCR)
blocked on CTE function calls and therefore no emails were sent. The fix was
unblock SRC from CTE function calls.
wi00959359
6. Unnecessary alarms are causing issues with reporting tools
Certain events are triggering alarms that contain irrelevant debug information.
This information is causing issues with reporting tools used to monitor
alarms. This update prevents those alarms from being displayed.
wi00874947
7. False alarm raised due to a wrong alarm id mapping
An incorrect alarm id mapping is found in TACS service functions and as
a result, a critical alarm is raised by an irrelevant event.
wi00836160
8. Emailed recordings are incomplete
Professional call recording is configured to forward recordings via email.
The recordings are not complete. This update should ensure the complete and
correct recording is captured.
wi00850243
9. Stop Professional call recording via F996
The fix provides a manual method to stop a call recording by pressing Feature 996
when the call recording is in progress.
wi00864355
Software update BCM450.R600.CORE-TELEPHONY-112
----------------------------------------------
1. Tandem calls drop after 15 seconds when **OPTION is active.
Tandem call gets dropped when the toll fraud monitor feature is turned ON
on the tandem node irrespective of the restrictions getting passed.
This update resolves the issue.
wi01069915
Software update BCM450.R600.SCD-109
-----------------------------------
1. IVR Services fail to start
There are instances where IVR cannot be enabled correctly and the IVR
services fail to start. A configuration file is missing information on the IVR
services and cannot switch them from a disabled state to an enabled state. After
applying this update the system will reboot and the IVR services should
start correctly.
wi01078232
2. BCM will not allow access to HTTP hosted file ending in .cfg.
This update resolves this issue by making changes in the
AliasMatch settings for *.cfg in ivr.conf file.
wi01063072
Software update BCM450.R600-IPTEL-108
-------------------------------------
1. No speech path on CFNA which redirects from SRG to CS1K CP via SIP.
External calls coming into SRG IP set via PRI are forwarded to CS1K
voicemail (Callpilot)over SIP.When Voicemail answers ,neither is the user
able to record the message nor,the DTMF digit (5 = shortcut) is recognised
to go to the record while the greeting is playing.This updates resolves
this issue by handling the BCM's internal streams media for a specific event.
wi01052802
Software update BCM450.R600.BEM-99
-----------------------------------
1. 64 bit support for CallPilot Desktop Messaging
This update makes two separate links avaialable for CallPilot Desktop
Messaging download on the web page- one for 32-bit OS and the other
for 64-bit OS.
wi01051652
Software update BCM450.R600-IPTEL-105
------------------------------------
1. When BCM sends 480 to drop the a SIP trunk call message doesn't contain
Reason header. This update resolve the issue by adding reason header field
for following 3 SIP responses.
404 Not found.
480 Temporarily unavailable.
503 Service unavailable.
wi01048437
2. User cannot enter more than 16 characters in STUN Server Address field in
Element Manager.This update resolves the issue by changing the STUN Server
Address field length to 32 characters.
wi01063802
3. Tandem Fax through SRG to CS1K CallPilot fails intermittently. The root
cause is due to the change is message sequence after upgrade,BCM opens a RTP
stream with ip address 0.0.0.0.This update resolve the issue by changing BCM
behavior so hat it opens RTP socket only after receiving proper transport info.
wi01046443
4. BCM calls Auto Attendant and on auto Attendant prompt, dials the number to
transfer the call to CM station. When the call is transferred to a CM
station there is no speech path between BCM and CM station.
This update resolves the issue.
wi01033678
5. If the BCM receives an event 415 during the setup of the call, then BCM
gets stuck in a loop of invites that can only be cleared by restarting feps.
This update resolves this issue by clearing a flag set by BCM for
sending re-INVITES.
wi01060571
Software update BCM450.R600.REMOTEX-INIT-104
-------------------------------------------
1. FMFM is not working after full system backup.
FMFM feature is not *re-enabled* after taking a complete backup of
the BCM. This update resolves the issue.
wi01061192
Software update BCM450.R600.UTPS-102
------------------------------------
1. Inclusion of UNIStim 5.5 0621C8Q,0623C8Q,0624C8Q and 0625C8Q
for IP phones i2007, 1110, 1120e and 1140e respectively.
062AC8Q for IP phones 1210, 1220 and 1230.
UNIStim Software Release 5.5 provides minor feature enhancements
and numerous quality improvements have been delivered with this
UNIStim 5.5 software release.
wi01064908
Software update BCM450.R600.SRC-98
-----------------------------------
1. SR: 1-3824348881: PCR feature generating "Failed to record a call" alarms
regularly Professional call recording feature fail to record calls which are
forwarded from application DNs and raised the "Failed to record a call" alarms.
wi01042611
Software update BCM450.R600.CORE-TELEPHONY-96
---------------------------------------------
1. No OLI from BCM50 to BCM450 Trunks.
BCM 50 R6 connected to BCM450 R6 using either H323 or Sip trunks in direct
mode does not send OLI from BCM 50 out over the PRI lines connected to the
BCM450 R6
wi01013669
Software update BCM450.R600.UTPS-92
----------------------------------
1. Inclusion of UNIStim 5.4 0621C8L,0623C8L,0624C8L and 0625C8L
for IP phones i2007, 1110, 1120e and 1140e respectively.
062AC8L for IP phones 1210, 1220 and 1230.
UNIStim Software Release 5.4 provides minor feature enhancements
and numerous quality improvements have been delivered with this
UNIStim 5.4 software release.
wi01052685
Software update BCM450.R600-IPTEL-90
-----------------------------------
1. An incoming call is answered by Auto-Attendant on the BCM450, which transfers
the call to the BCM50's set via SIP. The set has CFNA configured to BCM450's
centralized Voicemail. There was no voice path between the originating set and
the centralized voicemail. This update resolves this issue.
wi01035836
2. Outgoing call to mobile phone doesn't have speech patch when connecting to the
mobile mailbox for some of the subscribers.During error conditions the MCDN queue
was not getting refreshed. This update resolves this issue.
wi01036508
Software update BCM450.R600.VOICEMAIL-88
----------------------------------------
1. Voice Mail Message Forwarding feature activation issue
After applying the Kernel patch BCM450.R600.KERNEL-83-1,
Desktop Messaging (DM) Keycodes are not activated. Because of
which Message forwarding feature is not getting enabled in
CallPilotManager. This update corrects the issue.
wi01045439
Software update BCM450.R600.VOICEMAIL-87
---------------------------------------------
1. An user logs into a MeetMe conference by entering access code and presses
'#', and if he eventually waits then all IP sets will go down. This happens
only for Italian and Danish languages under CallPilot. This update will
correct the issue by making appropriate changes to Italian and Danish text prompts.
wi01028725
Software update BCM450.R600.IPTEL-86
---------------------------------------------
1. BCM continues to send re-INVITE to far-end after call termination
once it received 415 response to a mid call request.
This update resolves this issue.
wi01016963,wi01009950
Software update BCM450.R600.SNMP-PROVIDER-85
---------------------------------------------
1. SNMP service not running after reboot of BCM
SNMP service will not be running after the BCM reboot.
This update will start the service if SNMP is enabled,
once the BCM is rebooted.
wi01034878
Software update BCM450.R600.KERNEL-83
---------------------------------------------
1. System rebooted on its own
System resets on its own and reboot reason is "Hardware Watchdog".
This patch has following diagnostic changes and fixes:
>PMEM (persistent memory) is enabled.
>Checks Decrementer against 0 in idled task and fixing it.
>Checks if interrupt is enabled and fixing if not.
>Checks if Hard IRQ is enabled and fixing if not.
>Checks if Soft IRQ is enabled and fixing if not.
>Ensures watchdog kick every 10ms at most.
>Ensures 10us delay between the completion of the SPI transaction and the
de-assertion of the chip select.
wi01029594
Software update BCM450.R600.CORE-TELEPHONY-84
---------------------------------------------
1. SIP Trunks get locked up
When incoming SIP call contains the digits that match the destination/called
systems destination codes and there is no Remote Access Package allowing the
tandem call, the SIP trunks get locked up. This update resolves the issue.
wi01022176
Software update BCM450.R600.VOICEMAIL-81
----------------------------------------
1. Message waiting indicator stops working. Customer cannot detect if he has new
messages until he checks by using the feature code. After checking it starts
working again. This update will correct the issue by correcting the behavior of
a flag.
wi01001943
2. Message Forwarding .From. Email address field is not applied to emails sent.
When using Message forwarding, voice messages are not getting forwarded when
"From" E-mail address is configured in CallPilotManager with BT SMTP server.
This update will correct the issue.
wi01016602
Software update BCM450.R600.SCD-80
----------------------------------
1. The gen.cfg file could not be transferred in Element Manager using the.
Transfer File to My PC. option. This update resolves this issue by making
changes in the AliasMatch settings for *.cfg in oam.conf file.
wi01015143
Software update BCM450.R600.IPTEL-77
------------------------------------
1. Sigma sets registered to CS1K experience no voice path when call sender feature
is used due to a glare situation.This update resolves the issue.
wi00963891
2. H323 Calls that are redirected back to the Centralized voice Mail on the CS1000
are getting no speech path at times.
This update resolves the issue.
wi01011038
3. CS1K sets can't transfer BCM calls to another CS1K set, as BCM was not handling
codec switch from G.729 to G.711 during transfer of H323 calls.
This update resolves the issue.
wi01017130
Software update BCM450.R600.CORE-TELEPHONY-76
---------------------------------------------
1. AA answers in half the ring cycles configured for Sweden market profile.
In Sweden market profile,the Autoattendant is configured to answer incoming
calls after 12 rings. However,the call gets answered by the AA after 6 rings.
This update resolves the issue.
wi01002772
Software update BCM450.R600.CORE-TELEPHONY-74
---------------------------------------------
1. Call forward to Broadcast Hunt Group does not work.
When an analog incoming call on a set gets forwarded to broadcast
HG where all the members of the HG also have the appearance of the incoming
analog trunk, then call is not presented to the HG members.
This update resolves the issue.
wi00990603
2. Failure in SIP call when 3rd party sip server is used
Intermittent call failure is observed between a third party CC Server(Voxtron)
and BCM.In bad call scenario call stays established without a speech path.
voicestream goes only from Voxtron to client.voicestream from client to Voxtron
is missing.This update corrects the issue.
wi01003207
3. Background Music not working on i200x p2
Background music does not play on IP sets intermittently when F86 (background
music feature)is turned on.This update resolves the issue.
wi00856010
Software update BCM450.R600.VOICEMAIL-73
----------------------------------------
1. Messages forwarding original message not being deleted on Read/Delivery
Message forwarding has been configured to delete/read messages from the user's
mailbox when opened by the recipient. The message are being delivered and we
can see the read receipt being returned to the BCM. But the BCM does not
delete/read the original message. The problem is with delivery and disposition
notification status. While parsing the last message mime file it does not match
with the disposition notification status and the message will not marked/deleted
on opened and delivered. This update now handles the DSN properly to make sure
it's not NULL.
wi00973812
2. RCC download gets stuck due to bad XML
The RCC gets stuck whenever it gets the NULL priority Info for Skillset call.
This update corrects the problem by resolving the NULL priority info issue.
wi00989640
Software update BCM450.R600.IPTEL-72
---------------------------------------
1. SIP call from BCM50 to B5800 Sigma (Distributed) that is blind
transferred to CS1K UNIStim gets dropped when CS1K UNIStim phone
answers the call.
This update resolves this issue.
wi00958976
2. There is no voice path on SIP call originating from BCM to B5800
which is forwarded to CS1K because BCM is not able to send a re-INVITE
with proper IP address in SDP.
This update resolves this issue.
wi00977946
Software update BCM450.R600.SAMBA-71
---------------------------------------
1. System Backup on Network shared folder on Win Vista and higher
release fails
System backup fails as the smb.conf file was not updated. This
patch updates the smb.conf file and facilitates backup on network
shared folders of Win Vista or higher release.
wi00971338
Software update BCM450.R600.ELEMENT-MANAGER-69
------------------------------------------------
1. IP Trunks in BCM 6.0 Element Manager shows Non-supported CODEC (G723).
User can choose G723 as a supported codecs though it's not
supported.
This update resolves the issue by removing the G723 option from the IP Trunks.
wi00985401
Software update BCM450.R600.INITRD-68
---------------------------------------
1. Raid fails when primary HDD is restored by Acronis True Image 2011 or later
Disk mirroring fails when primary HDD is imaged using Acronis TI 2011 or
later as it bloats up the partion table to entire HDD. This patch removes
the disk consistency check and removes a bug which existed in disk size
check.
wi00966296
Software update BCM450.R600.IPTEL-67
---------------------------------------
1. Local call on BCM50R6 when blind transfered to B5800
over SIP results in one way speech path.
This update resolves this issue.
wi00966201
2. Call between BCM and Meeting Exchange over SIP fails, when
originating BCM supports MCDN over SIP.
This update resolves the issue.
wi00853708
Software update BCM450.R600.ELEMENT-MANAGER-66
------------------------------------------------
1. Non-supported CODEC (G723) showing as available in BCM 6.0 Element Manager.
User can choose G723 from a drop down list of supported codecs though it's not
supported.
This update resolves the issue by removing the G723 option from the list.
wi00969934
Software update BCM450.R600.IPTEL-63
--------------------------------------
1. Call coming into PRI on SRG and in normal mode, are CFAC to set in Normal
Mode. Set on the CS1000 then has a CFNA set for 3 rings to Voicemail.
At times, the call forwards to mail but has one way speech path.
This update resolves this issue.
wi00950886
Software update BCM450.R600.BCM-to-IPO-Migration-61
------------------------------------------------------
1. Migrate the existing 1120, 1140, 1220 and 1230 series UNIStim sets
to SIP based sets.Sets should also redirect themselves to the IPO
when BCM/SRG is replaced with an IPO without manual intervention.
When the TFTP server is ready user can navigate to a specific area of
EM(Configuration->Resources->IpSets->Migrate Sets to IPO )and provide
the IPO IP address. This TFTP address is persistent and can retain its
value across BCM/SRG reboot and EM restart.
DHCP server should be turned OFF in case IP sets are in DHCP ON mode
and user wants to use a different DHCP server (other then BCM or Third
party DHCP server) just before actual migration starts.
User should press the "Migrate Now" button to start actual migration
process and all supported sets will reboot.Upon reboot UNIStim sets
will be able to send Read Request to the IPO (provisioned IP address)
and download the configuration files. Sets are capable of reading
configuration files and download SIP firmware and redirect themselves to an
IP as per device configuration.
wi00932546
Software update BCM450.R600.CORE-TELEPHONY-64
---------------------------------------------
1. FMFM functionality fails on analog trunks
Find me Follow Me(FMFM) feature fails on analog trunks after applying
BCM450 R600.core-telephony-44. When the analog phone answers the
call, the extenal caller gets dead air.This update corrects the issue.
wi00954113
2. Crosstalk on IP sets when outgoing calls are made over PRI trunk.
Crosstalk is heard on the IP set when an autodial key, configured with
the destination code is pressed to make an outgoing call on the PRI
trunk. This update corrects the issue.
wi00960056
3. Coretel crash due to invalid TN (logevent 115)
This update corrects the referencing of NULL message pointer which results
in a crash of the core telephony component.This update corrects the issue.
wi00961755
4. Feature icons may not be retained in KEM/set keys.
Feature icons will not retain in KEM keys or set keys, when any key is
programed or reprogramed. This update resolves the issue.
wi00945990
5. Intermittently one-way speech with Meet-Me conference
Intermittently a one way speech path may occur when setting up a 3 party
conference CALL. If a conference member mutes himself and then disconnects
from the conference, speech resources are not properly cleaned up. If
members of a subsequent 3 party conference use this improperly released
resource they may experience one way speech path.
When a meet-me conference mutes himself and then goes into hold, now all
the participants in the conference drop the call, the held participant
will be released by the conference Server. The conference resource used
by him remains in MUTE state. So for the next conference in the system
whichever participant is allocated with this MUTED.
This update corrects these issues.
wi00961314
Software update BCM450.R600.VOICEMAIL-62
----------------------------------------
1. The Message Waiting Indicator (MWI)does not display intermittently
This improper behavior is caused due to delay in execution of semaphore
requests issued by voicemail to kernel. This update will correct the issue.
wi00955199
2. (RCC) 2.45.101, 103, & 104 download stops with CannotConnecttoDB
For Caller Input rule configuration, step number greater than 20 was causing
RCC download to stop. Maximum permissible value of step number is 20 and a
value greater than that should not be allowed.
This update checks the step number value and if it is greater than 20, it is
defaulted to 1.
wi00728870
3. BCM all versions - # or * input rules stops RCC (Microsoft SQL based)
download
Customer was using # and * as single character, fixed length caller input
rule for CC calls. These two characters are to be used as wildcard
characters. This update has blocked the usage of # and * as caller input
rules because these are wildcard characters and the BCM reserves a different
meaning for them. Introduced a change in the GUI text prompt appropriately.
wi00728869
4. RCC is not able to download call data from the BCM due to Invalid XML data.
The RCC download of new call data will stall when invalid Physical Line values
i.e... physical line value > 999 is received. This issue is resolved by
introducing a check for valid range of physical line allowing RCC to download
the call data.
wi00856055
Software update BCM450.R600.UTPS-59
-------------------------------------
1. Inclusion of UNIStim 5.3 0621C8J,0623C8J,0624C8J and 0625C8J
for IP phones i2007, 1110, 1120e and 1140e respectively.
062AC8J for IP phones 1210, 1220 and 1230.
UNIStim Software Release 5.3 provides minor feature enhancements.
Five customer reported cases have been closed and numerous quality
improvements have been delivered with this UNIStim 5.3 software release.
Visit D2GMTgvRQ2QJjrfkNG5YTnJ4kSxqKJvL9RnN8hRY32SYhGJws8Vr!170487718 for the
detailed bulletin.
wi00964544
Software update BCM450.R600.KERNEL-56
---------------------------------------
1. Ethernet packets with VLAN tag drops
BCM450 drops incoming full sized ethernet packets with VLAN tag because the
ethernet driver was not capable of handling full sized packets with VLAN
tag. This update fixes this issue.
wi00937733
Software update BCM450.R600.KERNEL-45
---------------------------------------
1. System rebooted on its own.
System reboot on its own and reboot reason being "Hardware Watchdog".
This issue is seen because of power save feature enabled in CPU.
This update fixes the issue by disabling the power save feature in CPU.
wi00868045
Software update BCM450.R600.TIMEZONE-50
---------------------------------------
1. DST Cancellation for Russia
On February 8, 2011, cancellation of DST in Russia was made official.
An hour was added in March 2011 for the last time, and clocks will not
move back again in the fall. This fix updates OS package to accommodate
this day light saving cancellation.
wi00941901
Software update BCM450.R600.IPTEL-46
-------------------------------------
1. One way speech path is observed when an active call on an IP set is
blind transferred to the far-end BCM over SIP.
wi00889555
Software update BCM450.R600.UTPS-42
-----------------------------------
1. Unistim 5.2 supports the Sets with New LCDs which will be released as part
of the Cost Reduction Program.UNIStim Software Release 5.2 delivers quality
improvements for all IP Deskphones including software fixes for over sixty
work items, and resolution of seven customer reported cases.
It fix following isssue,
During speakerphone conference calls using 2007 IP Desk phone, the 2007 may
beep and mute itself after some period of time.
Inclusion of UNIStim 5.2 0621C8G,0623C8G,0624C8G and 0625C8G
for IP phones i2007, 1110, 1120e and 1140e respectively.
062AC8G for IP phones 1210, 1220 and 1230.
wi00909252
Software update BCM450.R600.CTE-41
-----------------------------------
1. CTE client intermittently can't connect to BCM
Attempts by the TAPI client to connect with the BCM fails due to a
CoreTel timeout. This timeout occurs because the LAN CTE device table has
been improperly populated with a secondary station index.
Wi00879939
Software update BCM450.R600.CORE-TELEPHONY-32
----------------------------------------------
1. Analog trunk lockup for UK market profile
An enhancement which allows the end user to set the disconnect supervision detection time
for the UK market. The lockups were occurring because the PSTN was sending a disconnect
event that was too short to be detected.
wi00728913
2. PRI Lines cannot be assigned to BlocA
Change VoIP lines from BlocA to BlocB and try to move PRI Lines to BlocA.
The PRI lines cannot be assigned to BlocA and the only available options are BlocB through F.
wi00830849
3. KEMs reboot when moving lines using Feature *81
On sets with 3 or more KEMS connected using Feature *81 to perform multiple line moves
can cause all KEM modules on the phone to reboot forcing previously moved lines back
to their original location.
wi00817292
4. Cannot select facility for External Autodial in EM
When programming an autodial using Element Manager one
is not prompted to enter what facility should be used
(Routing Table, Prime Line, Line Pool).
wi00728895
5. When TAT call is answered held call is dropped.
A call from BCM1 to BCM3 (tandemed through BCM2) is rerouted back to
BCM2. TAT happens between BCM2 & BCM3 and the corresponding trunks
are released. Now, when the call is put on hold (Hold_normal), the
trunk (from BCM2 to BCM1) releases the call.
wi00881330
6. Unable to leave VM when Telephony Audio Collection Service is activated.
When the Telephony Audio Collection Service (TACS) feature is invoked on a
set and we try to invoke any Voice mail on the same set, the voice mails
sent to the called set do not get delivered.
wi00869535
7. Sets can only answer 1 call at a time even if multiple intercom keys are configrued.
A Set is configured with Multiple Intercom keys. The first call lands on
the set through a TANDEM scenario involving TAT. When a second new call
comes in, instead of appearing on the next available intercom key, the
call appears/blinks on the same intercom key where the first call is
present.When we try to answer the second new call by pressing the
blinking key the second call doesn'tget answered. This only affects
incoming calls.
wi00873407
8. Element Manager hangs when changing T1 line type.
When chainging T1 trunk types for Inactive T1 channels Element manager can
hang for 5 minutes before the operation compoets. Only one line can be changed
at a time. One He must reboot the BCM in order to configure the next line.
wi00862425
9. Analog Set will ring continuously (FNA) or provide dead air (FB).
A Call comes into an analog trunk of the SRG50 5.0. The trunk rings on
a Normal Mode set registered to the CS1K's Signalling Server. The Normal
Mode set is configured to forward calls to analog set on the SRG50. The
Analog Set is configured to Forward No Answer or Forward Busy calls to
the CS1K's CallPilot. The signalling protocol used on the IP Trunks is SIP.
When the Analog Set is busy the caller receives dead air.
When the call is forwarding with no answer the set continues to ring continuously.
wi00854371
10. Intermittent incoming call drops when ringing Call center agent at BCM.
Intermittent incoming PRI calls to Call centre agents are dropped when answered.
wi00882451
Software update BCM450.R600.CORE-TELEPHONY-12
----------------------------------------------
1. 8x16 has 4 ports stuck in enabling
After upgrade to BCM 6.0 the upper four ports of an 8 port
analog trunk card will not enable. This affects GATM 8,
8x16, and ADID8 modules.
wi00728891
2. On hold calls drop when attempting to pick up.
Tandem calls dropped after being placed on hold when
TAT feature is enabled
wi00728884
3. No ring back on tandem calls
Incoming target line calls to a BCM 450 that tandem over
point to point T1 trunk trunks to a BCM 50 ring twice
then disconnect if not picked up within the 2 rings.
The calling party does not hear ringback tone.
wi00819848
Software update BCM450.R600.VOICEMAIL-36
-----------------------------------------
1. BCM 450 French Language issue with Mailbox Manager
Many of the Mailbox Manager pages, mostly help pages, had text in
English even when French language was selected as the primary language.
This update corrects this problem by translating all English text
to French.
wi00864347
Software update BCM450.R600.IPTEL-37
------------------------------------
1. IP trunks lock up during improper disconnect sequence.If, during a call
disconnect the far end closes the TCP / IP socket before the BCM can respond,
The H.323 trunks may locked up requiring feps to be restarted to recover.
The issue is observed only when BCM 6.0 is working in tandem with CS1K 6.0.
wi00861540,wi00877628,wi00881033
2. Fax failures on tandem calls to SRG 7 or 10 digits incoming fax calls
from PSTN to CS1K, tandeming to SRG fail most of the time. Fax machine
rings but it does not transmit.
wi00867164
3. One way speech path when call transferred or placed on hold.
When a user transfers or unholds a call BCM was not sending authorization
information along with Re-INVITE. This results in no speech path.
wi00877314
4. Cannot make calls out of system after applying BCM450 R6.0 IPTEL-19.
Route information is not formed properly in the INVITE message.
The data structure used to copy the Route information was not proper.
wi00880016
5. Incoming call blind transferred to PSTN has no speech path.
wi00890769,wi00890904,wi00890905
6. BCM SIP Fallback to PSTN too slow on WAN failure
When the WAN connection is down, every attempted SIP call takes ten seconds to fail over.
Wi00729213
Software update BCM450.R600.IPTEL-19
------------------------------------
1. Alarm 10005 keeps occuring every 4 minutes if the keycode for IP Trunks(includes
SIP trunk also) is not applied.
wi00829683
2. PSTN calls to SRG along BRI trunk is answered by a set in Normal mode. When the
call is transferred to another set in Normal mode, there is only one-way speech
path.
wi00728988
Software update BCM450.R600.ELEMENT-MANAGER-38
----------------------------------------------
1. User can now turn call audit mechanism on or off for H.323 trunks by
checking or unchecking the "Enable Q.931 Status Enquiry" flag in
Element Manager. This flag has been added to the Configuration section
of the Settings panel for H323 Trunking. This mechanism should be used
if the BCM is experiencing "locked" or "hung" H.323 trunks. In order for
this Element Manager enhancement to function, the BCM must also be
running BCM450.R600.IPTEL-37.
WI00887080
Software update BCM450.R600.RECOVERY-39
----------------------------------------
1. The Sftp transfer fails for big sized backup files.
The scheduled SFTP backup transfers the partial backup file to server if backup size is
large (>100MB). This is because of premature death of ttyw window.
This update resolves this issue by running the "SCP" command on the background thus not
allowing the "ttyw" component not to be killed.
wi00904134
Software update BCM450.R600.DSP-FIRMWARE-28
-------------------------------------------
1. BCM 6.0: Echo on IP calls during double talk
This update makes adjustments to the DSP echo canceller parameters
for detection of double talk (2 people speaking at once) and regular echo
(single talk) to minimize echo on calls to the public network.
wi00873480
Software update BCM450.R600.SRC-MPS-26
--------------------------------------
1. False alarm raised due to a wrong alarm id mapping
Once the TACS service starts, a wrong alarm is sent to Element Manager
which causes wrong indication of the service.
It was discovered that an incorrect alarm id mapping is found in TACS
service functions and as a result, a critical alarm is raised by
an irrelevant event.
wi00832739
2. Unnecessary alarms are causing issues with reporting tools
Certain events are triggering alarms that contain irrelevant debug information.
This information is causing issues with reporting tools used to monitor
alarms. This update prevents those alarms from being displayed.
wi00874948
Software update BCM450.R600.UTPS-31
-----------------------------------
1 i2050v1 & i2004P1 sets fails connecting to the server
i2050 v1 & i2004P1 phones do not support the IT capability query, which
was blocking its boot up process and as a result fails to connect to
the server. This has been rectified by implementing a fix. So if an
IP Phone does not reply back to the IT capability query in 5 seconds,
then it is booted up without the AG2000 support for that phone.
wi00886844
2 The first few seconds of conversation is muted for calls to IP sets.
When calling 12xx IP set, the called party speech is muted
for the first 0.5-1.5 seconds due to delayed acknowledgement from
12xx set to BCM for setting of speech path.
Inclusion of UNIStim 5.1 solves this issue.
0621C8D,0623C8D,0624C8D and 0625C8D for IP phones i2007, 1110, 1120e
and 1140e respectively. 062AC8D for Ip phones 1210, 1220 and 1230.
wi00867619
3 Too long RUDP re-transmission worsens the muting problem at beginning
of call with lost RUDP packet.
This update corrects a condition where RUDP re-transmission
time (1.5s) is too long.
The issue is resolved by changing the timeoutLength value.
wi00831409
4 SetCookie message support for BCM
In order to support the AG, the Call Server team needs to implement
the AG's standard registration model. For AG 2000 support, the only
mandatory cookie is the DN (extension number).
With this fix AG standard has been implemented.
wi00820254
Software update BCM450.R600.BEM-25
----------------------------------
1. CallPilot: Outlook 2010 support should be mentioned on the HTML download page.
CallPilot Desktop Messaging - Microsoft Outlook 2010 is supported from version
05.00.41.112. This information has been updated in the CallPilot DM download page for BCM.
wi00868723
Software update BCM450.R600.ELEMENT-MANAGER-24
----------------------------------------------
1. Scheduled Service not in Day of the week order
Scheduled Services shows day of the week list in alphabetical Order and
not in day of the week order.This update corrects to display in day order.
wi00848324
2. System speed dial are sometimes deleted when clicking on the next line in Element Manager
There is a race condition between the Edit Event and Select Event. When
editing a row, if the next row is selected to quickly, the edited entry will be deleted.
This update will resolve this issue.
wi00873710
3. EM v.62.0.0 does not allow Shift 9 [(] and Shift 8 [*] to be used as a characters
in system passwords. Instead Shift 9 & 8 key presses are instead considered as
shortcuts for opening and closing the Network Element view respectively.
This update will resolve this issue.
wi00873719
Software update BCM450.R600.VOICEMAIL-17
----------------------------------------
1. Mailbox Manager does not give you the option for French
Textprompt in Mailbox Manager did not appear in French when the French
language was selected. This update rectifies this by introducing French
translation for the prompts appearing in English.
wi00856432
2. Unable to use F989 or Voicemail
When F989 is used to record a call, the temporary copy of the recording
does not get deleted. This blocks a lot of BCM disk space and in the long
run, there was no space left for new calls/messages to be recorded. This
update deletes the temporary copy of the recording from the BCM thereby
resolving the hard disk space issue.
wi00856426
Software update BCM450.R600.CTE-LMS-16
--------------------------------------
1. BCM Monitor does not display E&M lines in use, if the line number
is higher than 150. E&M trunks are working fine but do not display
when in use in BCM Monitor.This update corrects the issue by checking
the Line Number against the lowest possible Target Line Number - 1.
wi00819867
Software update BCM450.R600.INITRD-15
-------------------------------------
1. RAID does not start properly, red LED is displayed and Alarm 63004 is raised.
When adding or replacing an HDD (Hard Disk Drive) in a RAID (Redundant Array
Independent Disk) system, the synchronization process fails and the RAID LED
remains solid RED. HDD's will not synchronize and Disk Mirroring Operational Status
shows "Inactive". Issue occurs when the HDD partition sizes did not match.
This patch will resolve the issue and allow synchronization when HDD partitions do not match.
wi00840944
Software update BCM450.R600.ELEMENT-MANAGER-14
----------------------------------------------
1. Using java 1.6_18 or greater, dialogs that contain a password field can
transfer incomplete data to the BCM. If the OK button is clicked
immediately after the password is entered ( without entering the password
again for verification), the password entered is not sent to the BCM.
BCMRELEASE-1077
Software update BCM450.R600.IPTEL-13
------------------------------------
1. CS1K SIPline calls to BCM UNIStim phone. The call is then blind transferred to a
BCM TDM phone. There is no voice path and the status on SIPLine phone is Remote
On-hold
wi00841043
2. Some SIP call servers and service providers do not correctly handle the maddr
parameter in the Request-URI. The presence of this parameter can cause calls to
fail. With this fix, the maddr in R-URI parameter can be disabled to facilitate
successful call completion to affected servers and/or service providers.
BCMRELEASE-1097
Software update BCM450.R600.CORE-TELEPHONY-8
---------------------------------------------
1. IP set display is inconsistent across IP set models
The key description for IP sets is inconsistent across different IP set models.
For example the description for an intercom key on an 1120 set says "IC" + the set DN
wile on an 1140 the description says "Intercom"
BCMRELEASE-1074
2. SIP calls to PSTN through BCM fail if longer than 10 seconds
wi00729169
3. MWI, tone OR lamp, for analog phones on ATA2 not working.
Q02079632-02, wi00728926
Software update BCM450.R600.IPTEL-11
------------------------------------
1. No speech path on a call from CS1K_IPset to BCM set that is set CFAC to CS1K_CallPilot.
Outbound SIP trunk does not respond to UPDATE when inbound trunk has not yet negotiated
SDP via 100rel.
wi00733826
Software update BCM450.R600.IPTEL-7
-----------------------------------
1. SIP Standard Caps Exchange broken in some tandem calls.
wi00729216
2. BCM sending SIP INVITE request to the IP address different than the one with
which it got registered successfully.
wi00828944
3. BCM fails to acknowledge the SIP Response if an outgoing call to SIP-T
customer is not answered and far end tries to clear the call with a 480
response.
WI00825476
4. BCM should not treat SDP version as old when session id has changed
wi00732195
5. Ringback tone is not heard for the majority of the calls when dialling out
via Public SIP trunks and breaking out to PSTN.
wi00822623
6. BCM ignores the port information of the Contact-URI and sends INVITE to the
wrong port after receiving 302 response.
BCMRELEASE-1078
7. Calls from Skype clients produce non-numeric CLID. FEPS does not handle
non-numeric CLID very well and encodes the non-digit characters as digits
into VDI message and passes to CoreTel.
BCMRELEASE-1089
8. BCM-sip-SM-CS1K-cfac-SM-OneX - 1 way speech from OneX to BCM
wi00774905
9. CS1K_1_IPSet calls SIP to BCM_2050 blind transfers to SM_client with no
speech path
wi00819523
10. Call resumed with no media if transferred party doesn't answer call
wi00829858
11. CS1000:SW:LineTrunk:SIPInterop
wi00784193
12. No voice path when making call from CS1K_AE_set to BCM_set configured CFAC to SM_client
then CS1K_AE_set holds/retrieves the call
wi00828742
Software update BCM450.R600.UTPS-9
----------------------------------
1. 1200 series sets with factory firmware are not able to download firmware from BCM 6.0
and will not connect to the BCM.
wi00824900
Software update BCM450.R600.SU-2
--------------------------------
1. Recording very long calls using F989 Silent may cause IP sets to deregister
Under high load conditions, the IP sets may de-register when a
45 minute call is recorded using F989 that extension has a mailbox
with Message Forwarding enabled. The IP sets will quickly re-register.
This issue also causes Virtual Terminals to de-register affecting
Find Me/Follow Me meaning the Cte service must be restarted using
the Element Manager Service Manager.
BCMRELEASE-993
2. Call-leg transaction responses being ignored
(a) Possible loss of voice path between transferee and transfer
target when attempting to blind transfer over SIP trunk during
an outbound call in the ringing state.
(b) Possible codec renegotiation failure during transfer operations
over SIP trunks, resulting in loss of voice path.
BCMRELEASE-1021
3. Inbound ITSP association fails due to incorrectly statically provisioned DNS cache
Failure to associate some inbound ITSP calls could result in failure
to connect or failure to establish voice path (e.g. if NAT
compensation is required)
BCMRELEASE-1022
4. Connected identity feature is missing connected name on non-MCDN trunks
If connected-identity feature is enabled on non-MCDN trunks, only
connected number is delivered. Connected name is missing.
BCMRELEASE-1029
5. FEPS SIP trunk user account PAI overrides do not work with connected identity feature
If connected-identity feature is enabled on non-MCDN trunks and
PAI CLID and Display name is used at the SIP trunk user account
level the overrides do not take effect.
BCMRELEASE-1030
6. Private SIP trunk user account status collides with public SIP trunk user account
In case SIP trunk user account with the same SIP domain and CLID
is configured in both private and public domains SIP registration
status of the accounts does not reflect the real status. Both
accounts use the same persistent storage location to report the
status and one may overwrite the other.
BCMRELEASE-1031
7. Disable "maddr" contact parameter logic is reverse
The logic of "Suppress maddr parameter" option in EM is reverse.
When the option is turned on in the EM it is in fact turned off
in the IP trunking component and vice versa.
BCMRELEASE-1032
8. SIP accounts failed to register after upgrading BCM from 5.0 to 6.0
During migration from BCM 5.0 to BCM 6.0 existing SIP trunk user
accounts are migrated. Some new attributes of the accounts introduced
in BCM 6.0 are not initialized properly and are set at random. As
a result the operation of these accounts is unpredictable.
BCMRELEASE-1044
9. Remote Worker: No dial tone
One of remote IP set cannot get media. This is due to the wrong port sent
by UTPS in OpenAudioStream UNISTIM message.
BCMRELEASE-1058
10. Call transfer to VM stops working randomly
Call transfer to voicemail (feature 986) stops working on some phones, after
entering the mailbox number. The call is not transferred and it stays on hold.
Two lads were mistakenly using the same secondary station id, and as a
result the F986 request was not handled properly by the CTI. This update
resolves the issue.
Q02091765-04
11. SIP trunk diversion header does not get the CLID override treatment
The CLID will not be correct when using the CLID override as the SIP
trunk diversion header is not set.
BCMRELEASE-1057
12. SIP trunk call redirect fails when no transport param in contact
The outgoing call may fail due to a 302 SIP response causing a missed redirect
destination when the contact header gets ignored.
BCMRELEASE-1054
13. VoiceMail Read Receipts Enhancement to include Original Body of the Message
A VoiceMail Read Receipts Enhancement has to be made for the read receipt to include
the original message bodies with the receipt. This gives the user the ability to request a
read receipt from a person listening to a message and actually return the original message
back to the sender to tell them which message they listened to.
The voice or fax original message bodies are included in the read receipts and can be
listened to or viewed by F981 or Unified Messaging. This enhancement does not apply
to AMIS certified messages.
Q02032711-03
14. No CLID transmission on transferred calls to CS1k over H.323 trunks
When an incoming call to BCM transfers the active call
to a CS1K set over h323 with f70 feature, the incoming
line identifiers (CLID Information) are not transferred to customer.
Q02046221-05
15. Conference call is dropped
An incoming and outgoing trunk are conferenced together
through the BCM. When the set that joined teh tow parties
disconnects, the bridged call is dropped instead maintaining
the connection.
Q02115424-04
16. Remote sites don't not get Ringback tone
No ringback tone is audible to caller for outgoing tandem calls from
BCM to PSTN on T1 E&M trunks to a BCM4.0 although call is
actually ringing at the far end.
This update resolves the issue.
Q02118568-04
17. Non-BCM stations are not able to call BCM station if BCM station
has enabled the Find-Me feature
The problem occurs when a BCM station enables the Find Me in MM. The
call will fail unless another BCM station calls the BCM station with
the Find Me feature, the call will not succeed.
BCMIPOINTEROP-26
18. Direct pickup fails on SCS when call is originated from BCM
Attempts to pick up BCM calls by SCS over SIP trunk were blocked by
BCM not allowing REFER in unanswered state.
Q02102264-01
19. BCM <-> SCS interop: issue with Direct pickup on
SCS when call is external to BCM 450r1
An incoming PSTN call tandems via BCM over a SIP trunk to SCS
where it rings at set A. If, while set A is ringing, SCS set B
attempts direct call pickup, the call pickup will succeed but
there will be no media path connection.
Q02130340-03
20. Rotary Hunt Group not functioning correctly
When an incoming call is blind transferred to a rotary hunt group,
The first available set in the HG only gets a short ring blip, but
on completion of the transfer, the call rolls to the next available set.
Q02146813-01
21. Intermittent call drops when incoming calls are answered
Intermittently, incoming calls on analog lines are disconnected when
answered.
Q02091670-02
22. BCM Faxes stop working after 3 Days
Fax messages are failing due to a DSP lockup. This fix resolves
the issue
Q02111119-03
23. BCM Monitor cannot connect
BCM Monitor cannot connect due to secure sockets waiting to be closed
by other application.
BCMRELEASE-1055
24. Remote worker POP up window is not in proper format
The Remote Worker pop up window spacing is not correct.
BCMRELEASE-1079
25. RFC2833 support for i2050v4
RFC2833 defined DTMF tones are failing on i2050v4 with BCM.
BCMRELEASE-1062
26. ICC Calls in queue will not present to agents
ICC calls in queue are not presented to agents before being played
the Alternate message in the skillset mailbox.
BCMRELEASE-1065
27. T38 missing EOLs in RTC Bug fix
This change fixes the problem of missing EOLs in T38 on-ramp at the
end of Fax page transmission. There was a deficiency in T38 linker
layer which caused the number of EOLs (End of Line code) in RTC
(Return to Control) to be less than the standard number of 6. With
missed EOLs, some fax machines either reject the page or ask for
retransmission causing duplicate pages to be printed. By putting this
fix in place the number of EOLs in RTC in T38 on-ramp would be always
as same as the number of EOLs that the caller fax machine transmits.
Q02104860-02
28. BCM Monitor shows incorrect status of IP Trunks.
When an external outgoing call is made, from a set, and released quickly
before the far-end responds, then the trunk status under BCM Monitor is
shown incorrectly as active. This update resolves the issues as the necessary
code changes are made in CTE which updates the trunk status correctly.
Q02137864-04
BCM450.R600.CORE-TELEPHONY-1
----------------------------
1. This coretel update will prevent a NIL_TN destination timeslot
value from being passed to the kernel for a timeswitch connection.
Under heavy CPU load, the order of IP set shutdown messages received
from UTPS and MPS can create a scenario in which a NIL_TN value
may get used in a timeswitch connection. When the NIL destination
TN is passed to the kernel for a timeswitch connection, a system
error can occur. On the BCM450 platform, the error can cause a
CoreTel crash. On the BCM50 platform, the system does not crash,
but rather, writes into a random timeswitch location.
BCMRELEASE-1046
2. Call forward to Exchange UM fails with TRO on incoming call
An incoming call to the SRG is forwarded to the users set in Normal
mode on the main office. If TRO is active and the set actually has
Call Forward All Calls setup on the main office to the Exchange UM
server, the forwarded call will be disconnected.
This update includes the content of the following superseded Smart Update:
BCM450.R600.SU.System-021.201408
