Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM R4?

Status
Not open for further replies.

endlesswinter

IS-IT--Management
Mar 31, 2005
865
US
A few months after upgrade to R 3.7 to R4, via upgrade tool. The hard drive crapped out. All digital programing worked, but no Vmail or EM. I installed a R4 hard drive applied a good back up and voicemail came back, but it scrambled all the digital phone programing. After reprograming the phones, I cant access voicemail thru the EM and get an alarm that the http service has stopped. I also can't install any patches. My gut tells me I should have patched up before I applied the upgrade. Any thoughts?
 
I don't think you can patch the system until it's been upgraded to 4.0. However, the 4.0 system patch needs applying first, before the desktop.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top