BCM R2MFC Module ISSUE

[joebade]

Scenario

BCM 400 (A) with DTM module connected to a SP201 which is Connected to the DMS
100 at the central office. DMS 100 does R2 Signalling. BCM does ETSI PRI
signalling.

BCM 200 (B)&(C) connected to the BCM 400 (A) over IP trunks
BCM 400 (D) connected to BCM 400 (A) with a PRI link.

DID to any station on A,B,C,&D worked fine. Station to Station Calling works
fine.

SP201 suspect faulty. Bypassed SP201 with an R2MFC module. DID Calls to BCM 400
(D) from the PSTN work fine. DID calls to BCM 200 (B) & (C) now ring at the
Prime Set only.

DISA calls into BCM 400 (A) and then dialling a station works fine and stations
on BCM (B) & (C) are reached correctly.

Replaced a DTM module with a R2MFC module. The 2 BCM's (B & C) using VoIP incoming calls from PSTN DID go to prime set and not actual station.

Please help

 

[RikRodgers]

Try the BCM forum.