We are trying to change the customers system to MPLS network . When we try to change the I.P. address we get this error message "Exception occurred when trying to connect Detector 'BCMDetector' cannot determine the device type for xx.xx.xx.xx".Any ideas how to rectify this.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM migration to MPLS network
- Thread starter MegaLink7
- Start date
Firebird Scrambler
Systems Engineer
Which of your two LAN's is using the published IP address?. Have you tried changing it via the other LAN port?.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
- Status
Similar threads
- Question