Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM/IP Office SIP Trunking
- Thread starter ktludwig
- Start date
I had a friend attempt SIP trunking between a Cisco switch and a BCM, but this was way back in BCM 3.0.1 days and was unsuccessful. However these days, I was successful in setting up SIP trunking between a BCM50 and an SCS500/sipX PBX.
So to answer your question.. Just give it a try. Point some digits out your SIP trunks to the IP address of the IP office and see what happens. Monitor the ports using Wireshark to see the setup messaging...
--DB
So to answer your question.. Just give it a try. Point some digits out your SIP trunks to the IP address of the IP office and see what happens. Monitor the ports using Wireshark to see the setup messaging...
--DB
- Status
Similar threads
- Locked
- Question
- Locked
- Question
