BCM IP link to a Nortel Call Server Gatekeeper system

[Firebird Scrambler]

Hello everyone.

Has anybody been able to link up a BCM (3.5) with a Nortel Call Server V04.00t via it's NRS (Gatekeeper) Sig Server software?. I've been trying to connect one up & I'm having trouble getting any good help guides on how to configure it. By BCM has 2 IP Trunk ports enabled & I can view & change the H323 / Gatekeeper sections, but I'm wondering if the NRS has to be changed differently to match the BCM?.

Any help would be appreciated please?.

All the best

Firebird Scrambler
Meridian Programmer in the UK

 

[biv343]

I believe you'll need the MCDN/SL1 (or QSIG since you're in Europe) keycode to do IP trunking from BCM to M-1 after IPT software was released. Configure the BCM IP trunks as Gatekeeper Resolved, put in the Node IP of the NRS/Signalling Server, stop/start the VOIP gateway and you should be pretty much set to go, except for routing setup on both the BCM and CS1000.

You may need a FEPS patch in the BCM depending on what patches you have in the 3.5 system. Or just upgrade it to release 3.6 and put in the cumulative patch - might be worth doing that anyway.

 

[redcomet]

Use the SRG Configuration Guide for configuring the H323 Trunk

 

[Firebird Scrambler]

Thanks for the 2 replies. I'll attempt to configure them next week.

All the best

Firebird Scrambler
Meridian Programmer in the UK