Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM Alarm: 44-1
- Thread starter terrado7
- Start date
curlycord
Programmer
PRI/T1 circuit probably had issues/slippage outside.
If all seems ok then ignore it.
If persists every day then check connections and/or call the carrier.
=----(((((((((()----=
curlycord
If all seems ok then ignore it.
If persists every day then check connections and/or call the carrier.
=----(((((((((()----=
curlycord
oldestgeek
Technical User
Make sure your PRI is set to primary external clocking. Timing slips are a frequent cause of this alarm.
- Status
Similar threads
