danthephoneman
Vendor
Anyone have any details about a 6.0 release?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM 6.0
- Thread starter danthephoneman
- Start date
- Status
They are just about to start Beta trials and I have 2 customers applying to participate.
One HUGE improvement is for remote users. NO VPN ROUTERS REQUIRED AT THE REMOTE END. It's about g&d d@m$ed time!!!!!!
I know this works because I've already connected to Nortel's lab system with an old 2004 set from my house. Just set the S1 server address to the public ip of the BCM and voila......it asks for your registration password. Works like a charm.
There are also improvements in the FM/FM to support the use of analog trunks.
The introduction of the 2050 V4.
Support for multiple Business names.
Another big one.....the interoperability with heritage Nortel and Avaya products. guess we'll hear more about that one a little later on.
Enhancements to the Meet Me conference portal.
Enhancements to the Advanced Paging Productivity Pack.
Improvements in the SIP public trunking provisioning.
There's also something with the software design of the T-series sets. I think they're getting rid of the customized stuff in there. Something about 2 customized ASIC components that have reached their end of life. There is reportedly no change in the form or function of the phone so I guess it's just internal stuff.
That's about it as far as I know.
From what I've seen, it's stuff that should have been done about 3 years ago. Better late than never I guess.
One HUGE improvement is for remote users. NO VPN ROUTERS REQUIRED AT THE REMOTE END. It's about g&d d@m$ed time!!!!!!
I know this works because I've already connected to Nortel's lab system with an old 2004 set from my house. Just set the S1 server address to the public ip of the BCM and voila......it asks for your registration password. Works like a charm.
There are also improvements in the FM/FM to support the use of analog trunks.
The introduction of the 2050 V4.
Support for multiple Business names.
Another big one.....the interoperability with heritage Nortel and Avaya products. guess we'll hear more about that one a little later on.
Enhancements to the Meet Me conference portal.
Enhancements to the Advanced Paging Productivity Pack.
Improvements in the SIP public trunking provisioning.
There's also something with the software design of the T-series sets. I think they're getting rid of the customized stuff in there. Something about 2 customized ASIC components that have reached their end of life. There is reportedly no change in the form or function of the phone so I guess it's just internal stuff.
That's about it as far as I know.
From what I've seen, it's stuff that should have been done about 3 years ago. Better late than never I guess.
leftbase2009
Technical User
Any clues when it will be released?
oldestgeek
Technical User
I hope they expanded the number of characters on set names beyond 7.
2050v4 - there is a bulletin on
This software release is compatible with the Avaya Call Servers listed below.
- Avaya BCM 50 Release 3.0, 5.0, 6.0
- Avaya BCM 450 Release 1.0, 5.0, 6.0
- Avaya CS1000: Release 5.5, 6.0, 7.0
- Avaya CS2100: CICM 10.1 MR2 on Release SE10, SE11 and SE13
This software release is compatible with the Avaya Call Servers listed below.
- Avaya BCM 50 Release 3.0, 5.0, 6.0
- Avaya BCM 450 Release 1.0, 5.0, 6.0
- Avaya CS1000: Release 5.5, 6.0, 7.0
- Avaya CS2100: CICM 10.1 MR2 on Release SE10, SE11 and SE13
- Status
Similar threads
- Question